廣東料斗型干燥機
1、廣東料斗型干燥機采用均勻分散熱風之高性能熱風擴散裝置,保持塑料干燥溫度均勻,增加干燥效率。
2、*熱風彎管型設計,可避免粉屑堆積于電熱管底部,引起燃燒。
3、料桶內及內部零部件一律采用不銹鋼制。料桶內與底部分離,清料方便,換料迅速。
4、采用比例式偏差指示溫控器,可精確控制溫度。
5、雙重過熱保護裝置,可減少人為或機械故障所產生的意外。
6、微電腦控制,全位數式PD,控制LED狀態顯示。
7、24小時定時自動開機。
8、斜式易拆磁鐵底座。
Hopper Dryer
High performance hot air diffusion device using uniformly distributed hot air, keep the plastic dry and uniform temperature, increase drying efficiency.
Design of special hot air bent pipe, to avoid accumulation of power particles in the bottom of the electric heating pipe to cause combustion.
The barrel and the inner parts are all made of stainless steel. Separation between the barrel and the bottom, material cleaning convenience, refueling quickly.
Proportional deviation indicating controller, can precise temperature control.
Double overheating protection device, can reduction of accidents caused by human or mechanical failure.
Microcomputer control, full figure PD, control LED status display.
24 hour timer automatically boot.
Inclined easy detachable magnet base.