商品詳情
The Tissue-Tearor is a rotor/stator type tissue homogenizer which can rapidly homogenize, disrupt, and emulsify samples in 0.5 - 1000 ml of liquid. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in ten to thirty seconds. Little, if any, heat is produced during the process.
If you need 230 volt unit, please select the models that end in EUR. Four different probe sizes are avaliable - the 04, 07, XL, and 14. Unlike most other Brands of rotor-stator homogenizer, THE TISSUE-TEAROR COMES COMPLETE WITH BOTH THE HIGH-SPEED MOTOR AND ONE STAINLESS STEEL PROBE OF YOUR CHOICE. See chart below for selection guidance. Additional probes are available. All are interchangeable with the TT motor unit.
用來混合,乳化,切碎
用于少量樣品
方便拿取,單手可操作。也可以固定在鐵架臺上
耐熱耐壓的不銹鋼探頭
所有的探頭都是可更換的以及很容易取下來清洗
高速馬達,速度為5000-35000RPM用來混合,乳化,切碎
用于少量樣品
方便拿取,單手可操作。也可以固定在鐵架臺上
耐熱耐壓的不銹鋼探頭
所有的探頭都是可更換的以及很容易取下來清洗
高速馬達,速度為5000-35000RPMProduct Description
During operation, the suspended material is drawn into the bottom centimeter of the homogenizer probe by an internal rotor turning at 32,000 rpm. The material is repeatedly cycled through narrow slits located in the outer part of the probe where it is rapidly sheared and disintegrated by high frequency, mechanical action. Little if any heat is formed in the homogenization process and probe clean up between samples is simple and fast. An advantage if the objective is to isolate viable microorganisms from tissue or feces, rotor-stator type homogenizers will not disrupt most bacteria or yeast.
Catalog Number Practical Working Range (ml) Probe Diameter (mm) Working Probe Length (cm) 985370-04 0.5-5.0 4.5 4.8 985370-07 1-50 7 8.3 985370-14 5-1000 14 13.2 985370-XL 1-50 (use w. 50ml tubes) 7 10.9 * Dimensions taken from stator.