PGWGJ0703自動高溫高剪切粘度測定器
檢測原理：
高溫高剪切粘度測定儀參照SH/T0703、ASTM D5481標準設計和生產，用于測定機油在高溫高剪切條件下的粘度值。在150℃的恒溫條件下，注射管內的油樣通過連接注射管的氣泵實現進樣和標量，并在0.5-3.5MPa的惰性氣體壓力下流經0.15mm內徑的毛細管，以模擬高溫高剪切的實際應用場景。實驗自動記錄時長和實驗穩定氣壓，并自動計算待測油樣的高溫高剪切粘度值。
技術參數：
試驗標準：SH/T0703、ASTM D5481
電源：220V 50Hz
控溫方式：鋁浴恒溫
控溫范圍：實驗：150±0.1℃
粘度池?cái)?shù)：1管
毛細管內徑：0.15 mm
毛細管有效長度：16-18 mm
氣壓范圍：0.5-3.5 MPa
自動檢測、自動打印結果
主要特點
1、該儀器為創，無轉動部件，低故障率，維護成本低
2、采用專用的軟件，自動檢測結果；
3、玻璃毛細管符合標準要求，直徑 0.15mm，長 16mm；
4、對于以研究為目的用戶可設置不同的剪切速率和試驗溫度；
5、儀器采用單管檢測，方便快捷
PGWGJ0703 automatic high temperature high shear viscosity meter
Detection principle:
High temperature high shear viscosity meter (SH/T0703, ASTM D5481 standard design and production, is used to measure the oil under the condition of high temperature and high shear viscosity values.At 150 ℃ under the condition of constant temperature, the injection tube sample injection by connecting tube of the pump to achieve sampling and scalar, and 0.5 3.5 MPa in inert gas under pressure through the 0.15 mm diameter of capillary, to simulate the practical application of high temperature and high shear.Experiments for the automatic recording time and stable air pressure, and automatically calculate the high temperature high shear viscosity of the sample under test values.
Technical parameters:
Test standard: SH/T0703, ASTM D5481
Power supply: 220 v, 50 hz
Temperature control: aluminum bath temperature
Temperature control range: experiment: 150 + 0.1 ℃
Viscosity pool number: 1 tube
Capillary inner diameter: 0.15 mm
The effective length of capillary: 16 to 18 mm
Pressure range: 0.5 to 3.5 MPa
Automatic detection, automatic printing results
The main features
1, the instrument for domestic initiative, no moving parts, low failure rate, low maintenance cost
2, using special software, automatic test results;
3, glass capillary conform to the requirements of the standard, diameter of 0.15 mm, 16 mm long;
4, in the research for the purpose of users can set different shear rate and test temperature;
5, instrument using single tube detection, convenient and quick
采購中心
