特性和優點
簡便易用,準確進行交流/直流電流測量
直接連接到具有 TekVPI™ 探頭接口的示波器
直流至 20 MHz 帶寬
150 ARMS 電流功能
500 A 峰值脈沖電流功能
精度高,直流增益誤差一般小于 1%
準確測量 5 mA 的電流
低噪聲和直流漂移
在示波器顯示屏上自動確定顯示單位和讀數
通過示波器實現遠程 GPIB/USB 探頭控制
利用分芯探頭頭部結構可輕松地連接導線
可以輕松地消磁和自動清零
簡便進入示波器 UI 顯示菜單,獲得兩種探頭硬件的設置控制及探頭狀態和診斷指示器
應用
電源
半導體設備
逆電器/轉換器
電子鎮流裝置
工業/消費電子
馬達驅動器
交通運輸系統
TCP0150 是簡便易用的高性能 150 A AC/DC 電流探頭家族,設計用于使用和直接連接到 TekVPI™ 探頭接口。這一交流/直流電流測量探頭提供了 20 MHz 的頻帶,帶有可選擇的 25 A 和 150 A 測量量程控制。這些探頭還提供了低電流測量能力和每格 5 mA 的電流精度,這對實現高電平和低電平測量信號的廣泛動態電流范圍至關重要。
Features and benefits
Easy to use, accurate ac/dc current measurement
Directly connected to a TekVPI ™ oscilloscope probe interface
Dc to 20 MHz bandwidth
Maximum current function of ARMS 150
500 A peak pulse current function
High accuracy, dc gain error is generally less than 1%
Accurately measure the minimum 5 mA current
Low noise and dc drift
The display unit and reading are automatically determined on the oscilloscope display screen
Remote GPIB/USB probe control is realized through oscilloscope
The conductor can be easily connected with a split probe head structure
It can be easily degaussed and reset automatically
Simply enter the oscilloscope UI display menu to obtain the setting control of two kinds of probe hardware, probe state and diagnostic indicator
application
The power supply
Semiconductor equipment
Inverter/converter
Electronic ballast
Industry/consumer electronics
Motor driver
Transportation system
TCP0150 is easy to use 150 A high performance AC/DC current sensor family, designed for use and connected directly to the TekVPI ™ probe interface. This ac/dc current measuring probe provides A 20 MHz frequency band with optional 25 A and 150 A measurement range controls. These probes also provide low current measurement capability and a minimum current accuracy of 5 mA per grid, which is critical for achieving a wide dynamic current range of high - and low-level measurement signals