主要特性與技術指標
寬動態范圍(-70 至 +26 dBm)適用于小信號測量
超快的實時測量速度,可達 50,000 個讀數/秒
在零靜寂時間下進行實時測量,可確保每一個連續脈沖都被測量
平均模式時間選擇性功能支持整個動態范圍的平均和選定時間間隔平均功率測量
內部歸零和自動校準功能可以節省測量時間,降低測量不確定度
使用界面直觀的 BenchVue 軟件,輕松開始測量
描述
Keysight U2040 X 系列寬動態范圍功率傳感器能夠精確測量各種調制信號。此系列 USB 功率傳感器擁有 -70 至 +26 dBm 的寬廣動態范圍。U2040 X 系列可對各種調制信號執行高精度和可重復的功率測量,并提供高達 50,000 個讀數/秒的超快測量速度,以實現更高的生產吞吐量。內置歸零和校準功能有助于用戶節省測量時間和降低測量不確定度。U2040 X 系列功率傳感器得到 Keysight BenchVue 軟件的支持。BenchVue 軟件使您無需編程,便可輕松控制功率計記錄數據,并通過廣泛的顯示選件查看測量結果。只需將此傳感器連接至安裝有 BenchVue BV0007B 功率計/傳感器控制和分析應用軟件的計算機,便可執行復雜的脈沖分析和標準的平均功率測量。
Main features and technical indicators
Wide dynamic range (-70 to +26 dBm) for small signal measurements
Super fast real-time measurement speed up to 50,000 readings/SEC
Real - time measurement at zero silence time ensures that each continuous pulse is measured
The mean mode time selection feature supports average power measurements for the entire dynamic range and for selected time intervals
Internal zeroing and automatic calibration can save measurement time and reduce measurement uncertainty
BenchVue software with an intuitive interface makes it easy to start measuring
describe
Keysight U2040 X series wide dynamic range power sensors can accurately measure various modulated signals. This series of USB power sensors has a wide dynamic range of -70 to +26 dBm. The U2040 X series can perform high-precision and repeatable power measurements for a variety of modulated signals and provide ultra-fast measurement speeds of up to 50,000 readings per second to achieve higher production throughput. Built-in zeroing and calibration functions help users save measurement time and reduce measurement uncertainty. The U2040 X series power sensors are supported by Keysight BenchVue software. BenchVue software allows you to easily control the power meter to record data without programming and view the measurements through a wide range of display options. BenchVue BV0007B power meter/sensor control and analysis applications are installed on a computer to perform complex pulse analysis and standard average power measurements.