詳細介紹
HUMOR 20
高精度濕度發生器
Humor 20的工作范圍為10-95%RH,既可用于圓柱形探頭變送器的校準(如變送器、手持表等),也可用于墻裝方形變送器的校準(如數據記錄儀、墻面安裝儀表等)。在發生器的測量室中,還安裝有溫度傳感器,用戶可對被測儀器的溫度值進行單點比對。
根據Humor 20的雙壓法工作原理,它在普通的實驗室環境中就能正常工作,而無需昂貴的全空調環境。儀器操作非常簡便,工作時只需要蒸餾水、10bar壓力的無油壓縮空氣和90-230V AC的電源。設備本身提供校準儀表所需的24V DC直流電源,與變送器端子的接線快捷方便。
Humor 20使用傳統的雙壓法工作原理,這與各個國家標準實驗室中的測試儀器相類似。
對于相對濕度校準而言,濕度發生器的準確性、和數據記錄都顯得十分重要。E+E公司研發的第二代雙壓法濕度發生器HUMOR 20是滿足這些技術要求理想的相對濕度校準儀器。HUMOR 20的工作范圍為10-95%RH,既可用于圓柱形探頭變送器的校準(如變送器、手持表等),也可用于墻裝方形變送器的校準(如數據記錄儀、墻面安裝儀表等)。在發生器的測量室中,還安裝有溫度傳感器,用戶可對被測儀器的溫度值進行單點比對。
根據HUMOR 20的雙壓法工作原理,它在普通的實驗室環境中就能正常工作,而無需昂貴的全空調環境。儀器操作非常簡便,工作時只需要蒸餾水、10bar壓力的無油壓縮空氣和90-230V AC的電源。設備本身提供校準儀表所需的24V DC直流電源,與變送器端子的接線快捷方便。
HUMOR 20使用傳統的雙壓法工作原理,這與各個國家標準實驗室中的測試儀器相類似
技術資料 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
精度 | 0.3 - 0.9% RH | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
供電 | 90...230V AC | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
工作設備 | 蒸餾水, 壓縮空氣- 十公斤壓力的無油壓縮空氣或氮?dú)?/span> | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
工作范圍 | 10-95% RH | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
穩定時間 | < 3 min/測量點 |
濕度校準裝置
快速檢測濕度
濕度變送器和其它測量設備一樣也需要定期進行檢查和校準。E+E公司的濕度校準裝置為此提供了簡單快速的解決方案
該濕度校準裝置由一個校準槽和一個可選的E+E濕度標準工具組成,可快速有效的校準直徑為10-12mm的濕度測量探頭。
該工具操作簡單,即使不是專業的技術人員也可方便的進行操作。
濕度標準
E+E標準濕度溶液為不飽和鹽溶液,每一套標準溶液含有5瓶或50瓶密封的安瓶溶液,可存儲很長時間。鹽溶液無毒,使用四并不需要帶上特殊的防護手套。
如有需要,我們可提供安全數據表。E+E的每一套濕度校準設備都提供可溯源的由奧地利國家計量學會頒發的校準認證證書。
The humidity transmitters as all other measuring instruments shall be periodically checked and eventually adjusted. The most simple solution for this purpose is the E+E Humidity Calibration Kit.
濕度變送器和其它測量設備一樣,需要定期進行檢查和校準。E+E 的濕度校準裝置能方便的解決這一問題。鹽溶液濕度校準裝置由標準濕度溶液和不同形式的校驗瓶組成,特別為 E+E 濕度傳感探頭而設計,校準結果可信賴度高,即使不是專業技術人員也可以方便的進行操作.The E+E Humidity Calibration Kit is a cost effective solution for calibrating humidity measuring instruments with sensing probes Ø 10-12 mm (0.4-0.47 inch).
It is very easy to use and it does not require highly qualified technical staff. The kit consists of a humidity calibration chamber and a choice of E+E Humidity Standard Sets.
Humidity Standards
The E+E Humidity Standards are non-saturated salt solutions available in sets of five or fifty single-use ampoules, which may be stored an indefinite time.
The salt solutions are non-harmful, handling them does not require specific safety measures. Safety data sheet is available upon request.
Each E+E Humidity Standard Set is supplied with a traceable calibration certificate, issued by the Austrian National Metrology Institute (NMI).
Technical data
0% RH ... ±0.3% RH
5% RH ... ±0.5% RH
10% RH ... ±0.5% RH
20% RH ... ±0.5% RH
35% RH ... ±0.5% RH
humidity value in %RH ...
accuracy at 23 °C (73.4 °F)
50% RH ... ±0.9% RH
65% RH ... ±0.9% RH
80% RH ... ±1.2% RH
95% RH ... ±1.2% RH
humidity value in %RH ... a
ccuracy at 23 °C (73.4 °F)
The humidity transmitters as all other measuring instruments shall be periodically checked and eventually adjusted. The most simple solution for this purpose is the E+E Humidity Calibration Kit.
The E+E Humidity Calibration Kit is a cost effective solution for calibrating humidity measuring instruments with sensing probes Ø 10-12 mm (0.4-0.47 inch).
It is very easy to use and it does not require highly qualified technical staff. The kit consists of a humidity calibration chamber and a choice of E+E Humidity Standard Sets.
Humidity Standards
The E+E Humidity Standards are non-saturated salt solutions available in sets of five or fifty single-use ampoules, which may be stored an indefinite time.
The salt solutions are non-harmful, handling them does not require specific safety measures. Safety data sheet is available upon request.
Each E+E Humidity Standard Set is supplied with a traceable calibration certificate, issued by the Austrian National Metrology Institute (NMI).
Technical data
0% RH ... ±0.3% RH
5% RH ... ±0.5% RH
10% RH ... ±0.5% RH
20% RH ... ±0.5% RH
35% RH ... ±0.5% RHhumidity value in %RH ...
accuracy at 23 °C (73.4 °F)
50% RH ... ±0.9% RH
65% RH ... ±0.9% RH
80% RH ... ±1.2% RH
95% RH ... ±1.2% RHhumidity value in %RH ... a
ccuracy at 23 °C (73.4 °F)