滾筒刮板干燥機

滾筒刮板干燥機滾筒刮板干燥機原理Principle滾筒刮板干燥機是一種內加熱傳導型轉動干燥設備，濕物料在滾筒外獲得以導熱方式傳遞的熱量，脫除水分，達到所要求的濕份含量，熱量由筒內壁傳到筒外壁，再穿過料膜，其熱效率高，可連續操作，故廣泛應用于液態物料或膏狀物料的干燥，對膏狀和粘稠物料更適用

滾筒刮板干燥機

滾筒刮板干燥機原理   Principle

滾筒刮板干燥機是一種內加熱傳導型轉動干燥設備，濕物料在滾筒外獲得以導熱方式傳遞的熱量，脫除水分，達到所要求的濕份含量，熱量由筒內壁傳到筒外壁，再穿過料膜，其熱效率高，可連續操作，故廣泛應用于液態物料或膏狀物料的干燥，對膏狀和粘稠物料更適用。

Drum dryer heat conduction in a rotating dryer, drum outside the wet material obtained in the way of transfer of heat to heat, moisture removal, copies of the required content of the wet, the heat transmitted from the cylinder tube outer wall, wear over material film, its high thermal efficiency, continuous operation, it is widely used in liquid or paste material dry material, the paste and viscous materials more suitable.

----------------------------------------------------------------------------------------------------------------

滾筒刮板干燥機結構形式   Structure

滾筒刮板干燥機可分為二種形式：?jiǎn)瓮玻p筒干燥機，另外也可按操作壓力分常壓和減壓兩種形式。

        Can be divided into two types: monocular, binocular dryer, while also operating pressure can be atmospheric and vacuum points in two forms.

----------------------------------------------------------------------------------------------------------------

滾筒刮板干燥機特點及應用   Features and applications

◎  操作彈性大，適應性廣，能適應多種物料和不同產量的要求。

◎  熱效率高，其一般熱效率約為80-90之間。

◎  干燥時間短，滾筒外壁上的被干燥物料有干燥開始時能形成的濕料膜，一般為0.5-1.5mm，整個干燥周期僅為10-15s，特別適用于熱敏性物料。

◎  干燥速率大：由于料膜很薄，且傳熱傳質方向一致，料膜表面可保持30- 70k.H O(m2/h)的汽化強度。

廣泛應用于：米粉、麥片、淀粉、馬鈴薯全粉等食品的干燥成品成片狀、粉狀及顆粒狀。

 

◎  operating flexibility, adaptability, able to adapt to a variety of materials and different production requirements.

◎  high thermal efficiency, thermal efficiency of their generally between about 80-90.

◎  the drying time is short, outside the walls of the drum was the beginning of the dry material with dry material to form the wet film is generally 0.5-1.5mm, the drying cycle is only 10-15s, especially for heat-sensitive materials.

◎  Drying rate: As thin film materials, and heat and mass transfer in the same direction, the membrane  surface  can  be  expected  to  maintain  a  30-70k.H O  (m2.h) vaporization  of strength.

Widely used: rice, cereals, starch, potato powder, dried food product into a sheet, powder and granular.

----------------------------------------------------------------------------------------------------------------

滾筒刮板干燥機技術參數   Technical parameters

型號	HG	5/5	5/10	5/15	9/10	9/15	9/20	9/25	9/30	10/30	15/25	15/30	15/35	15/40	15/52	20/40	20/52
加熱面積	m2	0.75	1.5	2.3	2.8	4.2	5.6	7	8.4	9.4	11.8	14	16.5	18.8	24.5	25.1	32.7
直徑	mm	500	500	500	900	900	900	900	900	1000	1500	1500	1500	1500	1500	2000	2000
長度	mm	500	1000	1500	1000	1500	2000	2500	3000	3000	2500	3000	3500	4000	5200	4000	5200
長	mm	2000	2500	3000	3000	3500	4250	4750	5250	5250	5200	5750	6250	6750	7500	7000	7500
寬	mm	1500	1500	1500	2000	2000	2000	2000	2000	2750	3250	3250	3250	3250	3250	4050	4050
高	mm	2750	2950	3150	3250	4000	4750	5500	6000	6000	6000	6500	7000	7500	7500	7500	8000
主機重量	T	1.6	1.8	2	5.4	6.3	7.2	8.2	9.1	11.2	12.2	12.8	13.3	14.2	22	22.4	28.7
總重量	T	1.8	2.1	2.3	5.6	6.6	7.7	8.8	9.9	12	13	13.8	14.5	15.6	23.5	23.9	30.5
蒸汽耗量	0.4 MPa/m3	6	9	13	18	2	22	24	26	30	40	45	50	55	80	85	98
使用	kw min	1.5	1.5	2.2	2.2	3	3	4	4	4	5	5	6.5	7.5	11	11	15
功率	kw max	7.5	7.5	9	11	15	18.5	30	36	36	45	55	60	60	60	75	80

 滾筒刮板干燥機是常州利君干燥的一款產品，利君干燥還提供一些其他的產品，主要就包括：振動流化床干燥機,錐形螺帶混合干燥機,錐形螺帶真空干燥機,錐形螺帶真空混合干燥機,氣流干燥機,,沸騰制粒干燥機,盤式連續干燥機,真空耙式干燥機,高速離心噴霧干燥機等，歡迎有需要的聯系我們。