VPS®C系列干式螺桿真空泵 返回列表頁

VPS®C系列干式螺桿真空泵

 (變螺距干式螺桿真空泵)

優異的抗腐蝕性氣體及其所夾帶液體的處理能力，真空度可達10-3托。Excellent corrosive gas and entrain liquid handling capabilities and realizes 10-3 torr vacuum degree

?VPS的C系列干式真空泵包含所有P系列的傳統優勢

（極限真空度高、防腐蝕及冷氣效果等）

VPS dry vacuum pump includes the standard advantage of the P Series(Single

Pitch) model and following details

(Low utimate pressure, corrosion resistance, cooling effect, etc.)

極限真空度高
Low Ultimate Pressure

干式螺桿真空泵能在大氣壓限壓力的全范圍內持續運行。單泵運行極限真空度可以達到1Pa，并且效率。

The dry vacuum pumps can operate continuously in all the ranges of pressure from atmosphere to the ultimate pressure, and it can reach at 0.0075Torr(1Pa) by itself and has a high efficiency.

防腐蝕設計      Corrosion Resistance Design

- 經過特殊涂層（PTFE、PFA、Ni、NIFA等）處理可以用于輸送有毒、有腐蝕性和可凝性的氣體。

Suitable for pumping Toxic, Corrosive and condensable gas by special coating(PTFE, PFA, Ni, NIFA).

-通過氣鎮降低蒸汽的壓力來防止腐蝕性氣體冷凝。

 Prevents condensation of corrosive gas through lowering vapor pressure by the gas ballast.

-冷卻效果好      

Cooling Effect is good.

- 無需冷卻氣體                       

No Cooling Gas necessary.

- 的夾套水冷結構                         

Unique hydrodynamic spiral jacket structure.

- 出口溫度降至符合或接近T4要求                                    

Reduce discharge temperature greatly & close to T4 requirement.

能耗         Power Consumption
-變螺距結構設計      Variable pitch screw design.

- 能耗降低30%以上        Power consumption reduced 30%

特性 Characteristics of

VPS-C系列干式螺桿真空泵 VPS-C Series Vacuum Pump

密封結構可靠耐用Reliable seal structure

●  采用機械密封和唇形密封Mechanical seal and lip seal applied.

●  干式真空泵專用機械密封Dry vacuum pump exclusive mechanical seal.

● 機械密封前設有空氣和氮氣氣障保護Protect from dust & etc to purge Air & N2 in front of mechanical seal.

采用變螺距螺桿Applid variable pitch screw

● 合理的泵溫升設計防止涂層損壞Prevention of coating damage by pump temperature rise

● 節能設計降低能耗30%以上Reduction of power consumption by 30% by energy-saving design

真空度的改進Vacuum degree improvement

● 真空度達到0.0075Torr（1Pa）Reaches the maximum vacuum degree 0.0075Torr(1Pa)

●真空度高，提高抽氣效率 Increase pumping volume from high vacuum

●真空度從大氣壓到1torr保持穩定的抽速 Maintains stable volume from atmospheric pressure up to 1Torr

螺旋式夾套冷卻結構Spiral coolant jacket

●  螺旋式夾套具有優良的冷卻效果Excellent cooling efficiency of the spiral jacket

●  運行溫度低Low operating temperature

●  通過少量的冷卻液量就可以控制泵內溫升Controls temperature inside the pump with a small amount of coolant

設備材質Material of construction

●  腔體Casing :球墨鑄鐵（特氟龍涂層，標配PTFE涂層） Ductile Iron(Teflon Coated, PTFE)

●  螺桿Screw : 球墨鑄鐵（特氟龍涂層，標配PTFE涂層）Ductile Iron(Teflon Coated, PTFE)

●  軸封Shaft Seals

-進氣口（后端）Suction(Rear) : 雙唇密封+單唇密封Double Lip Seal & Single Lip Seal

-出氣口（前端） Discharge(Front) : 機械密封+唇形密封Mechanical Seal & Lip Seal

- 驅動端Drive End : 油封Oil Seal

●  軸承Bearings

- 進氣口（后端）Suction(Rear) : 滾柱軸承Roller Bearing

- 出氣口（前端）Discharge(Front) : 雙滾珠軸承Angular Double Ball Bearing

- 驅動端Drive End : 單滾珠軸承Single Ball Bearing

●  O型圈O-ring : 氟橡膠Viton

另外，還有以下選項可選However, the followings are also available ;

? 特殊涂層-加厚特氟龍（PFA），鎳氟龍（NIFA），鍍鎳等Special coatings Teflon(PFA), NIFA, Ni Plated, etc

? 特殊O型圈，如全氟醚O型圈 Kalrez, Special O-rings such as Kalrez

? 特殊機型密封，如哈氏合金，耐蝕高鎳

 Special Mech. Seals like Hastelloy, Ni-resist

通暢的排氣口結構Smooth discharge structure

●  氣體通路短，可使氣體快速排出Short gas path through the pump make quick gas discharge

●  可以順暢地排出泵內因冷凝產生的積液Smooth condensate draining within the pump

●  的流體處理能力Excellent liquid handling ability

IEC法蘭（NEMA可選）IEC Flange (NEMA Optional)

●  簡潔的C法蘭設計降低了噪音水平，消除了聯軸器校準問題Mostly C-flange design Simplified mounting reduce noise level and eliminate shaft alignment

●  增強的螺紋防止變形和振動Rib enhancement for deformation and vibration prevention

防潤滑脂泄露Grease leakage prevention

●  三聯唇型密封Triple single lip seal

●  優化潤滑空間，防止?jié)櫥孤禔pplied the optimized grease space

VPS®C系列干式螺桿真空泵 參數表

 VPS-C Series Dry Screw Vacuum Pump Technical Data 

外形尺寸表 Dimensions

性能曲線Performance Curve