詳細(xì)介紹
特征 | P5200A | P5202A | P5205A | P5210A | |
衰減 | 50X / 500X | 20X / 200X | 50X / 500X | 100X / 1000X | |
差分電壓 | 500X:±1300 V 50X:±130 V | 200X:±640 V 20X:±64 V | 500X:±1300 V 50X:±130 V | 1000X:±5600至五 100X:±560 V | |
共模電壓 | ±1300 V | ±640 V | ±1300 V | ±5600至五 | |
輸入電壓到地球 | 1000 V CAT II | 450 V CAT的升 300伏CAT的LL | 1000 V CAT II | 2300 V CAT的升 1000伏CAT III | |
帶寬 | 50兆赫 | 100兆赫 | 100兆赫 | 50兆赫 | |
差分輸入阻抗 | 10MΩ2 pF的 | 5MΩ以上,2助攻 | 10MΩ2 pF的 | 40MΩ,2.5 pF的 | |
每個輸入端與地之間的輸入阻抗 | 5MΩ以上,4 pF的 | 2.5MΩ,4 pF的 | 5MΩ以上,4 pF的 | 20MΩ,5 pF的 | |
典型的共模抑制比(CMRR) | DC:> 80分貝 100千赫:> 60分貝 3.2兆赫:> 30分貝 50兆赫:> 26分貝 | DC:> 80分貝 100千赫:> 60分貝 3.2兆赫:> 40分貝 50兆赫:> 30分貝 | |||
電纜長度 | 1.8米 |
Tektronix offers a broad portfolio of high-voltage probing solutions that enable users to safely and accurately make floating measurements.
Key performance specifications
Bandwidths up to 200 MHz
Up to 6000 V differential (DC + pk AC)
Up to 2300 V common (RMS)
Key features
Overrange Indicator
Safety Certified
Switchable Attenuation
Switchable bandwidth limit
Applications
Floating measurements
Switching power supply design
Motor drive design
Electronic ballast design
CRT display design
Power converter design and service
Power device evaluation
Connectivity
BNC interface (P5200A probes)
TekVPI® interface (TMDP and THDP Series probes)
TekProbe® interface (P5202A, P5205A, and P5210A Series probes)
Model overview
TMDP0200 | THDP0200 | THDP0100 | |
---|---|---|---|
Attenuation | 25X / 250X | 50X / 500X | 100X / 1000X |
Differential Voltage | 250X: ±750 V 25X: ±75 V | 500X: ±1500 V 50X: ±150 V | 1000X: ±6000 V 100X: ±600 V |
Common Mode Voltage | ±750 V | ±1500 V | ±6000 V |
Maximum Input Voltage-to-Earth | 550 V CAT I 300 V CAT III | 1000 V CAT II 600 V CAT III | 2300 V CAT I 1000 V CAT III |
Bandwidth | 200 MHz | 200 MHz | 100 MHz |
Rise Time | <1.8 ns | <1.8 ns | <3.5 ns |
Slew Rate | <275 V/ns at 1/250 gain | <650 V/ns at 1/500 gain | <2500 V/ns at 1/1000 gain |
Input Impedance at the Probe Tip | 5 M? || <2 pF | 10 M? || <2 pF | 40 M? || <2.5 pF |
Typical CMRR | DC: > -80 dB 100 kHz: > -60 dB 3.2 MHz: > -30 dB 100 MHz: > -26 dB | DC: > -80 dB 100 kHz: > -60 dB 3.2 MHz: > -30 dB 100 MHz: > -26 dB | DC: > -80 dB 100 kHz: > -60 dB 3.2 MHz: > -30 dB 100 MHz: > -26 dB |
Cable Length | 1.5 m | 1.5 m | 1.5 m |
P5200A | P5202A | P5205A | P5210A | |
---|---|---|---|---|
Attenuation | 50X / 500X | 20X / 200X | 50X / 500X | 100X / 1000X |
Differential Voltage | 500X: ±1300 V 50X: ±130 V | 200X: ±640 V 20X: ±64 V | 500X: ±1300 V 50X: ±130 V | 1000X: ±5600 V 100X: ±560 V |
Common Mode Voltage | ±1300 V | ±640 V | ±1300 V | ±5600 V |
Maximum Input Voltage-to-Earth | 1000 V CAT II | 450 V CAT l 300 V CAT ll | 1000 V CAT II | 2300 V CAT l 1000 V CAT III |
Bandwidth | 50 MHz | 100 MHz | 100 MHz | 50 MHz |
Differential Input Impedance | 10 M? || 2 pF | 5 M? || 2 pF | 10 M? || 2 pF | 40 M? || 2.5 pF |
Input Impedance between each Input and Ground | 5 M? || 4 pF | 2.5 M? || 4 pF | 5 M? || 4 pF | 20 M? || 5 pF |
Typical CMRR | DC: >80 dB 100 kHz: >60 dB 3.2 MHz: >30 dB 50 MHz: >26 dB | DC: >80 dB 100 kHz: >60 dB 3.2 MHz: >40 dB 50 MHz: >30 dB | ||
Cable length | 1.8 m |