制藥網
詳細介紹
P7600 系列 TriMode 探頭和 MSO/DPO70000DX 及 DPO/DSA70000D 系列示波器設計提供業內的系統噪聲水平。要在低幅度信號上進行準確測量，這種高靈敏度是非常重要的。
主要性能指標
完整 33 GHz 帶寬到達探頭端部 (P7633)
業內的探頭和示波器系統噪聲
主要特點
TriMode™ 探頭 - 一次設置無需調整探頭端部連接即可完成三種測量
差分
單端
共模
遠程頭部設計連接
使用 P7500 系列 TriMode 焊入式探頭端部
2.92mm
SMP
可將探頭放大器靠近被測電路放置
同軸適配器
P7500 探頭端部適配器
探頭自動檢測端部并應用 DSP 糾正濾波器
特定于探頭的 S 參數
從探頭內存儲數據創建 DSP 濾波器
TekConnect® 接口 - TekConnect 示波器/探頭控制和使用
從探頭補償盒或示波器菜單直接控制
The P7600 series TriMode probes and MSO/DPO70000DX and DPO/DSA70000D series oscilloscopes are designed to provide the lowest level of system noise in the industry. This high sensitivity is important for accurate measurements at low amplitude signals.
Key performance indicators
Full 33 GHz bandwidth reaches the end of the probe (P7633)
Industry's lowest probe and oscilloscope system noise
The main features
TriMode ™ probe - once set up without having to adjust the probe end connection can complete three measurements
The differential
single-ended
Common mode
Remote header design connection
The probe amplifier can be placed close to the circuit under test
Coaxial adapter
The 2.92 mm
The SMP
P7500 probe end adapter
Use the P7500 series TriMode solder probe end
The probe automatically detects the end and applies a DSP correction filter
S parameters specific to the probe
Creates a unique DSP filter from data stored within the probe
TekConnect ® interface - TekConnect oscilloscope probe control and use
Direct control from probe compensation box or oscilloscope menu
制藥網