呼吸閥擋板(FCI型)
FCI Type Breathing Valve Flap
安裝方法:
將油罐頂呼吸閥
①(如圖示、下同)取下,然后將擋板
⑤折疊從結(jié)合管
③送入
④內(nèi)展平,而后將固定板盤置于接合管法蘭中心位置,把靜電接地線
②墊圈壓在呼吸閥連接螺栓下方,然后將呼吸閥重新安裝好即可。
1、呼吸閥擋板吊裝于呼吸閥與油罐的接合管下方,以減少呼吸過程中油氣外溢的損失。
2、訂貨時請指明名稱、規(guī)格、型號。罐頂接合管實際高度n。
Installation method:
①the respiration valve oil(as shown, similarly hereinafter)remove,and then will dampers
⑤from folding conjugation tube
③④into within opened out,and will be fixed board dish in conjugation tube flange center,the static grounding lines
②in the respiration valve gasket pressure below the connecting bolts,and then will the
respiration valve to install a good can.1 the reducebig breath process of oil and gas spill
losses,2.ordering,please specify name specification,type,potactual height n conjugation tube.