進口黃銅電磁閥

德國托普進口黃銅電磁閥特點：

(1)系統簡單，便接電腦，價格低謙。電磁閥本身結構簡單，價格也低，比起調節閥等其它種類執行器易于安裝維護。更顯著的是所組成的自控系統簡單得多，價格要低得多。由于電磁閥是開關信號控制，與工控計算機連接十分方便。在當今電腦普及，價格大幅下降的時代，電磁閥的優勢就更加明顯。

(2)動作快遞，功率微小，外形輕巧。電磁閥響應時間可以短至幾個毫秒，即使是先導式電磁閥也可以控制在幾十毫秒內。由于自成回路，比之其它自控閥反應更靈敏。設計得當?shù)?/span>電磁閥線圈功率消耗很低，屬節能產品；還可做到只需觸發動作，自動保持閥位，平時一點也不耗電。電磁閥外形尺寸小，既節省空間，又輕巧美觀。

Germany imported top brass solenoid valve:

(1) the system is simple, then the computer, the price is low. Solenoid valve itself is simple, the price is low, compared to other types of actuators easy to install and maintain. What's more, the automatic control system is much simpler and the price is much lower. As the solenoid valve is a switch signal control, and industrial computer is very convenient to connect. In today's computer popularization, prices fell sharply, the advantages of the solenoid valve is even more obvious.

(2) action express, power small, lightweight appearance. Solenoid valve response time can be as short as a few milliseconds, even if the pilot solenoid valve can be controlled within tens of milliseconds. As a result of the self loop, more responsive than other control valve. Properly designed solenoid valve coil power consumption is very low, is an energy-saving products; can also be done only trigger action, automatically maintain valve position, usually does not consume electricity. Solenoid valve size is small, not only to save space, but also light and beautiful.

進口黃銅電磁閥特點：

進口黃銅電磁閥里有密閉的腔，在不同位置開有通孔，每個孔都通向不同的油管，腔中間是閥，兩面是兩塊電磁鐵，哪面的磁鐵線圈通電閥體就會被吸引到哪邊，通過控制閥體的移動來擋住或漏出不同的排油的孔，而進油孔是常開的，液壓油就會進入不同的排油管，然后通過油的壓力來推動油缸的活塞，活塞又帶動活塞桿，活塞桿帶動機械裝置動。這樣通過控制電磁鐵的電流通斷就控制了機械運動。

A closed cavity inlet solenoid valve brass, in different locations to open a hole, each hole leads to different pipeline, the middle valve chamber, both sides are two electromagnets, which face the magnet coils body will be attracted to which side, or to block the leakage of the oil draining hole through different control valve, and the oil inlet hole Shichang opened, hydraulic oil will enter the drain pipes of different, then the oil pressure to push the piston cylinder, piston and piston rod, the piston rod drives the mechanical device. By controlling the current of the electromagnet, the mechanical movement is controlled.

進口黃銅電磁閥技術參數：

使用壓力：0～10kg/cm2 zui大耐壓力：16kg/cm2  

使用流體粘度：20CST以下 工作溫度：-5～100℃

電壓波動范圍：±10% 動作方式：直動式型式、常閉式（即通電后閥開啟，或常開式（通電閥關閉）工作壽命＞15萬次

絕緣等級：B級經圈溫升＜75℃功率＜15W

口徑范圍： DN10-100(3/8”-4”)