進口法蘭式襯氟蝶閥

德國巴赫進口法蘭式襯氟蝶閥概述：

進口法蘭襯氟蝶閥的蝶板安裝于管道的直徑方向。在蝶閥閥體圓柱形通道內，圓盤形蝶板繞著軸線旋轉，旋轉角度為0°~90°之間，旋轉到90°時，閥門則牌全開狀態。
目前襯氟蝶閥作為一種用來實現管路系統通斷及流量控制的部件，已在石油、化工、冶金、水電等許多領域中得到極為廣泛地應用。在已公知的蝶閥技術中，其密封形式多采用密封結構，密封材料為聚四氟乙烯等。由于結構特征的限制，不適應耐高溫、高壓及抗磨損等行業。本類閥門在管道中一般應當水平安裝。

Inlet flange type fluorine lined butterfly valve

Germany Bach imported flange type fluorine lined butterfly valve overview:

Butterfly valve with inlet flange and fluorine butterfly valve installed in the pipe diameter direction. In the valve body cylindrical channel, disc shaped disc around the axis of rotation, the rotation angle of 0 degrees ~90 degrees, when rotated to 90 degrees, the valve is fully open state.

At present, the fluorine lined butterfly valve is used as a component to realize the on-off and flow control of the pipeline system, which has been widely used in many fields, such as petroleum, chemical industry, metallurgy, water power and so on. Butterfly valve has been known in the technology, the seal of the form of the use of sealing structure, sealing materials such as ptfe. Due to the limitation of structural characteristics, it is not suitable for high temperature, high pressure and abrasion resistance. This kind of valve should be installed horizontally in the pipeline.

進口法蘭式襯氟蝶閥的定義：

1、小巧輕便，容易拆裝及維修，并可在任意位置安裝。
2、結構簡單、緊湊，操作扭矩小，90°回轉開啟迅速。
3、流量特性趨直線，調節性能好。
4、蝶板與閥桿的連接采用無銷釘結構，克服了有可能的內泄漏點。
5、蝶板外圓采用球面造型，提高了密封性能及延長了閥門的使用壽命，帶壓啟閉5萬次以上仍保持泄漏。
6、密封件可更換，且密封可靠達到雙向密封。
7、蝶板可根據用戶要求噴涂覆層，如尼龍或聚四氟類。
8、該閥可設計成法蘭連接和對夾連接。
9、驅動方式可選擇手動、電動或氣動。
法蘭襯氟蝶閥適用于溫度:≤120℃或≤150℃，
公稱壓力:≤1.6MPa給排水、污水、食品、供暖、燃?xì)?、船舶、水電、冶金、能源系統以及輕紡等行業，特別適用于雙向密封和閥體易銹蝕場合，作調節流量和截流介質。

Definition of inlet flange type fluorine lined butterfly valve:

1, compact and lightweight, easy disassembly and maintenance, and can be installed in any position.

2, the structure is simple, compact, operating torque is small, 90 degrees turn to open quickly.

3, flow characteristics of straight line, good adjustment performance.

Connect 4, butterfly plate and valve stem with no pin structure, overcome the possible internal leak.

5, the butterfly plate outer circle using spherical shape, improve the sealing performance and prolong the service life of the valve, with pressure open and close more than 50 thousand times still keep leakage.

6, seals can be replaced, and sealed to achieve two-way seal.

7, butterfly plate can be sprayed according to user requirements, such as nylon or Teflon coating.

8, the valve can be designed into a flange connection and clamp connection.

9, the driver can choose manual, electric or pneumatic.

Flange fluorine butterfly valve suitable for temperature: less than or equal to 120 DEG C or less than or equal to 150 DEG c,

Nominal pressure: 1.6MPa water supply and drainage, sewage, food, heating, gas, shipbuilding, hydropower, metallurgy, energy systems and textile industries, especially suitable for bidirectional seal and body corrosion situation, adjust the flux and closure of media.

進口法蘭式襯氟蝶閥技術參數：

guan網：http://www.twvalve。。ｎｅｔ/html/3413.html