產品展廳收藏該商鋪

您好 登錄 注冊

當前位置:
尚階(上海)自動化設備有限公司>>瑞士Contelec>>瑞士Contelec AG編碼器

瑞士Contelec AG編碼器

返回列表頁
  • 瑞士Contelec AG編碼器

  • 瑞士Contelec AG編碼器

  • 瑞士Contelec AG編碼器

  • 瑞士Contelec AG編碼器

收藏
舉報
參考價 面議
具體成交價以合同協議為準
  • 型號
  • 品牌 其他品牌
  • 廠商性質 經銷商
  • 所在地 上海市

在線詢價 收藏產品 加入對比

更新時間:2018-04-03 18:14:47瀏覽次數:2347

聯系我們時請說明是制藥網上看到的信息,謝謝!

聯系方式:王昊強查看聯系方式

產品簡介

產地 進口 產品新舊 全新
瑞士Conec AG編碼器 傳感器

德國ASensTec GmbH傳感器

德國IPR - Inligente Peripherienfür Roboter GmbH工具 模塊 抓手

詳細介紹

 

瑞士Conec AG編碼器 傳感器

德國ASensTec GmbH傳感器

德國IPR - Inligente Peripherienfür Roboter GmbH工具 模塊 抓手

產品系列:


:王工
同號
      449147851
價注意事項:
       1.請發書面詢價函(郵件,,傳真等),不接受口頭報價。
       2.如果型號不能*對上,請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和,謝謝。

意大利MoxMec srl氣缸 抓手

產品系列:

Specifiche Tecniche

MODELLO

ESAE-C-A/B

ESAE-C-C

ESAE-C-D

ESAE-S

ESAE-M

Tipo

Cilindri

Slitte

Motori

Immagine del prodotto

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

Corsa (mm)

50 - 300

50 - 300

50 - 300

300 - 1.000

-

Spinta max
(in N)

100

200

500

200

0,6 - 2,5 Nm

Velocità max (mm/s)

400

200

100

300

4.500
giri/min

Ripetibilità (mm)

± 0.1

 

Rivelazione di posizione

Encoder incrementale

Filetto estremità asta

M10

M14

M14

-

-

Capacità di memoria

16 movimenti, ognuno con velocità, accelerazione, posizione ed altro programmabili

Alimentazione

DC24V ± 10% (3 Amp mass.)

Durata

10.000 Km di funzionamento se applicato secondo specifiche tecniche

Protezione

IP-40

IP-20

IP-40

Pesi (Kg)

1 - 1,2

1,6 - 3,1

1,9 - 3,4

3,7 - 10,7

0,64 - 0,87

Funzioni

- posizionamento
- impostazione direzione di zero
- movimento incrementale
- limite fine corsa

- segnale di zona
- segnale posizione raggiunta
- modalità forza spinta
- regolazione guadagno servo

Strumenti di programmazione

Accessori

Applicazioni

ESAE-A-T

意大利MoxMec <wbr>srl氣缸 <wbr>抓手Tastiera di programmazione

Programmazione delle posizioni e parametri

ESAE-A-P

Kit di programmazione per PC

Programmazione delle posizioni e parametri da PC

Assi cartesiane X-Y-Z
意大利MoxMec <wbr>srl氣缸 <wbr>抓手

 

1. NON NECESSITA DI REGOLAZIONI NELLA BASE

4. NON C'E' SURRISCALDAMENTO

意大利MoxMec <wbr>srl氣缸 <wbr>抓手Facile regolazione e taratura della base vibrante senza l'intervento di un esperto. Ideale per cambi produzioni questo grazie anche hai nuovi regolatori digitali che sono programmabili e funzionano a 110 - 220 V 50-60Hz意大利MoxMec <wbr>srl氣缸 <wbr>抓手Gli elementi piezo sono sicuri e non c'è alcun rischio di surriscaldamento o di incendio

2. ALIMENTAZIONE STABILE E COSTANTE

意大利MoxMec <wbr>srl氣缸 <wbr>抓手E' garantita un'alimentazione stabile e costante, senza parametri specifici e senza subire interferenze dall'esterno. Adatto per pezzi piccoli, leggeri e per microcomponenti.

5. COMPATTO E DI DIMENSIONI CONTENUTE

意大利MoxMec <wbr>srl氣缸 <wbr>抓手Le dimensioni contenute consentono l'utilizzo della base piezo dove l'applicazione dell'alimentatore convenzionale non è fattibile

3. NESSUN EFFETTO MAGNETICO

意大利MoxMec <wbr>srl氣缸 <wbr>抓手Grazie all'assenza dei magneti nella base, nessun effetto magnetico è esercitato dall'unità di funzionamento sui pezzi da alimentare ed orientare.

6. IMPORTANTE RISPARMIO ENERGETICO

意大利MoxMec <wbr>srl氣缸 <wbr>抓手La base piezo permette una riduzione del consumo energetico pari al 70% e oltre rispetto agli alimentatori elettromagnetici


PIEZO FEEDERS

TIPOLOGIA

ADER CIRCOLARI

ADER LINEARI

ADERAF
CIRCOLARI

LINEARI DOPPIO
MOVIMENTO

Numero Modelli

7

10

4

5

Peso (Kg)

1,7÷53

0,5÷18

1÷11,8

0,8÷7

Dimensioni (mm)

Ø 90÷390

135÷390

Ø 60÷214

165÷250

Frequenza Vibrazione

60÷255 Hz

60÷182 Hz

60÷400 Hz

60÷400 Hz

Dimensione Tazze (mm)

Ø 100÷800

 

Ø 60÷400

 

Lunghezza Canalina (mm)

 

200÷700

 

200-400

Senso Scorrimento

Orario / Antiorario

Lineare

Orario / Antiorario

Lineare

BASI VIBRANTI ADER CIRCOLARI

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

Basi vibranti piezoelettriche circolari sulle quali è possibile montare diversi tipi di contenitori di forma conica, cilindrica e a spirale con diametro da 100mm a 800 mm.

BASI VIBRANTI ADER LINEARI

意大利MoxMec <wbr>srl氣缸 <wbr>抓手Basi vibranti piezoelettriche lineari sulle quali viene fissata una canalina sagomata per alimentare ordinatamente i pezzi. Garantiscono un'alimentazione fine e costante dei pezzi provenienti dall'autodistributore circolare, evitando inceppamenti e incastri dei particolari alimentati.

BASI VIBRANTI ADERAF CIRCOLARI

意大利MoxMec <wbr>srl氣缸 <wbr>抓手Basi vibranti piezoelettriche circolari ad alta frequenza che, grazie alle micro oscillazioni prodotte dalle balestre piezo, permettono di alimentare microcomponenti con la massima semplicità. Hanno una tolleranza in quota centesimale quindi permettono di montare tazze lavorate a CNC, adatte per selezioni ad alta precisione.

BASI LINEARI CON DOPPIO MOVIMENTO

意大利MoxMec <wbr>srl氣缸 <wbr>抓手La particolarità di queste basi vibranti piezoelettriche è data dal doppio movimento con un canale di andata e uno/due di ritorno. Questo permette di effettuare la selezione sul lineare tramite delle canaline lavorate a CNC garantendo un'alta precisione e la ripetibilità della selezione. Particolarmente indicate per l'alimentazione di micro componenti. In queste applicazioni, gli alimentatori circolari fungono da semplici tramogge mentre i pezzi sono perfettamente orientati nella canalina del lineare.

REGOLATORI DIGITALI

意大利MoxMec <wbr>srl氣缸 <wbr>抓手I nuovi regolatori digitali permettono una facile taratura della base vibrante. Premendo due tasti sul controllo remoto o tramite PC/PLC è possibile cambiare frequenza e voltaggio, dati che possono essere memorizzati e richiamati in caso di cambio produzione. Sono collegabili in rete tramite bus di campo con relagolazione centralizzata di tutte le basi vibranti. Questi regolatori sono alimentati a 110÷200V 50÷60Hz o a 24V per le integrazione su impianti.

 

Bracci meccanici di carico e scarico con meccanismo a camma. Progettato e ideato sulla base del “saving time” per ridurre notevolmente il tempo di progettazione e costruzione di chi realizza impianti di montaggio.

Velocità, precisione, ripetibilità sono le caratteristiche dei nostri bracci meccanici.

AVETE SPESSO IRREGOLARITA' DI FUNZIONAMENTO COL VOSTRO BRACCIO PNEUMATICO?

RISOLVEO CON I NOSTRI
BRACCI MECCANICI

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

Movimento irregolare del braccio causato da:

• Dall'urto al momento dell'arresto del cilindro
• Insufficienza della rigidità dell'unità
• Fluttuazione della pressione d'aria
• Vita breve del cilindro

Movimento corretto e rapido

• Assume un movimento stabile grazie alla camma che ha una
forma che non dà scossa né vibrazione ed assorbe l'inerzia
tramite un meccanismo rigido
• Non subisce interferenze dall'esterno e anche dopo 10 anni
di funzionamento ha la stessa ripetibilità

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

Libertà di movimento limitata

• Non può fermarsi durante la corsa
• E' difficile aggiungere una nuova corsa intermedia
• Non è possibile cambiare la corsa di prelievo e di avanzamento

Corsa di movimentazione

• Può essere arrestato in qualsiasi momento
• Grazie alla combinazione di movimento delle 2 camme è
possibile creare qualsiasi movimento

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

Difficoltà nel progetto, controllo e regolazione

• Necessita di molto tempo per i collegamenti dei sensori e tubi dell'aria
• Necessita di molto tempo per la regolazione di posizione e di velocità di
arresto

Meno tempo significa riduzione di costo e di lavoro

• Regolazione facile
• Installazione semplice
• Manutenzione minima

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

Problemi ambientali

• Importante consumo d'aria e di
energia elettrica del compressore
• L'olio si nebulizza nell'ambiente
• Troppo rumoroso
• Perdita d'aria all'impianto pneumatico

Rispettoso dell'ambiente

• Alta efficienza grazie alla potenza del motore
• A parità di modello il consumo
dell'energia elettrica è solamente 1/10
• L'azionamento del motore non inquina
l'ambiente e non fa rumore

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

AVETE UN PROBLEMA DI QUESTO TIPO?

LE RISPOSTE LE AVETE DALLE NOSTRE PINZE

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

La vostra pinza si rompe frequentemente!!

• Le griffe non sono rigide?
• il movimento della pinza è molto lento?
• la pinza è bloccata?

Grazie al nostro meccanismo originale e brevettato, è garantita una lunga durata che nussun concorrente può realizzare.
Il sistema originale con leva specifica e l'azionamento a rullo garantisce ottime prestazioni con una minima manutenzione

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

La forza di presa è insufficiente!!

• frequenti errori di presa e posizionamento?
• perde spesso la posizione?
• forza di presa insufficiente?

La nostra pinza garantisce una presa decisa e delicata al tempo stesso, come le dita di una mano

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

意大利MoxMec <wbr>srl氣缸 <wbr>抓手

Il corpo pinza è ingombrante e difficile da applicare!!
• la pinza è troppo grande e pesante?
• ripetibilità non garantita?

E' disponibile una vasta gamma di pinze, la loro struttura compatta garantisce un'efficienza elevata.

 
Functional principle :
德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手

The position compensation is made possible through specially developed elastomer elements. If a position offset occurs, the workpiece to be inserted will be moved automatically by the resulting reaction forces in such a way that jamming an wedging of the parts is prevented. Depending on the chamfer present, positioning misalignments of up to 3 mm and angular misalignments of up to 2 degrees can be compensated. The compensation takes place horizontally in the x-y plane and about the x-y-z axis for angular compensation. After extension, the element returns back into the starting postition through self-centering.

 

 

德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手Typ[mm]Empf. Handlingsgew. [kg]LX [mm]
50500,6 - 1,150
 80801,2 - 2,4100
 1001002,5 - 3,5150
 1251253,7 - 7,0200
 1601607,1 - 18300
 20020018 - 52400
25025052 - 90450
30030052 - 150600

The length of the gripper and part (LX Value) is the determining parameter for assembly operations with close tolerance fittings and insertion operations in which minimum insertion forces are required. The LX vlaue (see table) is the maximum value which should not be exceedes for an  type. For simple insertion or placing operations, the recommended payload is to be taken as the approximate value to determine the necessary model. It can be exceeded in case of slow travelling movements.
We shall be pleased to support you with your selection.
Attention: If the elastomers have come into contact with oil or chemicals, please contact us, because in that way you need special elastomers made of Perbunane.
If elastomers are for use in machine tools, then Perbunane elastomers must be used, because they are resistant to cooling media.

 

 

Technical Data Compliance Wrist
德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手
ModelWeight
[kg]
Max. Compliance
[mm]
Max. Rotation
[°]
Payload
[kg]
Locking Force
[N bei 6 bar]
-50 G0,26± 3± 20,6 - 1,1-
-80 G0,26± 3± 21,2 - 2,4-
-80 Ü0,3± 2± 21,2 - 2,4-
-80 P0,4± 2± 11,2 - 2,4220
-80 V0,45± 2± 11,2 - 2,4220
-100 G0,42± 3± 22,5 - 3,5-
-100 Ü0,46± 2± 22,5 - 3,5-
-100 P0,7± 2± 12,4 - 3,5360
-100 V0,82± 2± 12,5 - 3,5360
-125 P1,2± 2± 13,7 - 7,0600
-160 P1,7± 2± 17,1 - 18500
-160 V1,9± 2± 17,1 - 18500
-200 P4,0± 3± 118 - 521800
-200 V4,5± 3± 118 - 521800
-250 P10,1± 3± 152 - 902100
-250 V10,6± 3± 152 - 902100
-300 P5,8± 2,5± 152 - 1501800

 

Functional principle:

德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手

The compensation movement is implemented through linear roller guidance based on the compound slider principle. Compensation takes place without reaction force. The fixture can be locked in a central position using a double-action pneumatic cylinder. The compensation can take place two-dimensionally in the x-y direction.

 

 

Information:
The maximum allowable moment is the decisive parameter for the selection of the lateral alignment devices. Additional part picking or placing forces which can work as moment loads on the guides must be taken into account. If shock loads are to be expected, in case of a collision for example, a robot load limiter should be foreseen for the protection of the guides (see pages on robot load limiter systems).

 

 

Technical data Lateral Alignment Device KA
德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手
ModelKA 65KA 80KA 100KA 125KA 160KA 200KA 250KA 300
allowable Moment [Nm]233060100150250300
Payload [kg]0,51,02,02-51015-4030-8050-200
Extension [mm]± 1,5± 2± 2± 3± 4± 12± 14± 25
Pressure Force [N]1502004008001000160025004000

 

Functional principle:

德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手

The compensation movement is implemented through linear roller guidance based on the compound slider principle. Compensation takes place without reaction force. The fixture can be locked in a central position using a double-action pneumatic cylinder. The compensation can take place two-dimensionally in the x-y direction.

 

 

Information:
The maximum allowable moment is the decisive parameter for the selection of the lateral alignment devices. Additional part picking or placing forces which can work as moment loads on the guides must be taken into account. If shock loads are to be expected, in case of a collision for example, a robot load limiter should be foreseen for the protection of the guides (see pages on robot load limiter systems).

 

 

Technical data Lateral Alignment Device KA
德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手
ModelKA 65KA 80KA 100KA 125KA 160KA 200KA 250KA 300
allowable Moment [Nm]233060100150250300
Payload [kg]0,51,02,02-51015-4030-8050-200
Extension [mm]± 1,5± 2± 2± 3± 4± 12± 14± 25
Pressure Force [N]1502004008001000160025004000

 

Functional principle:

The position compensation takes place horizontally in the pushing or pulling direction through playless ball bearings. The insertion force is determined through pressure springs and the pressure of an integrated pneumatic cylinder. The base plate is driven out to monitor an approach or insertion motion; it is inserted to monitor a removal operation (see functional sketch). The movement of the base plate is detected through an inductive sensor. In case of quick process movements, pressure can also be applied to the cylinder to block the unit.

 

 

Information:
The Z-axis compliance wrist can be combined with a compliance wrist in the simplest. As integrated components of an ZN, they can be used universally for tolerance compensation of lateral and angular misalignment with simultaneous fault recognition for monitoring.

 

 

Technical data Z-Axis Compliance Wrist ZN
德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手
Model ZN5080100125160200250300
Spring Force [N]10/2020/4040/180200/300200/400400/1000400/1500400/2000
Payload [kg]122-35-82040160300
Insertion Path [mm]88101212121212
Force Range Pneumatic [N]-10-15015-38025-50050-60060-170070-195080-2200

 

 

Function
  • Release turning angle about z-axis
  • Reset into the zero position
  • Store rotary offset
  • Adjustable rotary force
德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手
Compensation
  • Angle of rotation about the z axis
Compensation movements
  • Up to ± 30°
Arias of application:
  • Loading/unloading of workpiece carriers and machines
  • Palletising
  • Assembly
Function:
  • Release the tipping angle about the x-y axes
  • Release individual axis about the x or y axes
  • Reset into the zero position
德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手
Compensation:
  • Single axis tipping angle in the x-direction or in the y-direction
Compensation movements:
  • Up to ± 5°
Areas of application:
  • Loading/unloading of workpiece carriers and machines
  • Palletising
  • Assembly
Functional principle
Function

Robot and tool adapter plates are held in position pneumatically and form a rigid unit under normal working conditions. The release forces or moments are presrcibed through the preset air pressure. In case of an overload, the adapter plates release.
A sensor detects the extension and transmits a signal to the robot controller, which stops the robot unit. When the collision has been cleared and the tool returned to the vertical position again, the ULS/ULD unit returns to the starting position through two built-in centering pins.

 

 

UL Reaction

The robot load limiter reacts to pressure forces in the z-direction, to moments about the x and y-axes and to torsional moments about the z-axis.

 

 

Technical Data Robot Load Limiter ULS

德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手
ModelULS 60ULS 80ULS 100ULS 125ULS 160ULS 200
Compensation in z-axis-direction [mm]11,011,913,611,914,59,5
Compensation horizontal [grade]8 °10 °12 °10 °7 °4 °
Compensation torsion [grade]360 °360 °360 °360 °360 °360 °
" with Anti-rotation device [optional]-90 °90 °40 °90 °90 °
Axial Breakaway 1 - 6 bar [N]113-680181-1085246-1477453-2720785-47101327-7960
Moment Breakaway 1 - 6 bar [Nm]2 - 134 - 267 - 4117 - 10339 - 23686 - 517
Repeatability [mm]± 0,02± 0,02± 0,03± 0,03± 0,05± 0,1
Weight [kg]0,360,420,751,56,79,8
Force- / Moment Rang ULS Force-/Moment Rang

Technical Data Robot Load Limiter with internal cable routing (ULD)

德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手
ModelULD 60ULD 80ULD 100ULD 125ULD 160ULD 200ULD 250ULD 300
Compensation in z-axis-direction [mm]11,112,112,012,115,010,415,023,0
Compensation horizontal [grade]9 °11 °9 °11 °5 °4 °5 °5 °
Compensation torsion [grade]40 °40 °40 °40 °40 °40 °40 °40 °
Axial Breakaway 1-6 bar [N]135-700210-1100300-1500510-2755830-47201380-67101509-90241834-11389
Moment Breakaway 1-6 bar [Nm]3-155-288-4518-10643-24191-382108-544119-714
Repeatability [mm]± 0,02± 0,02± 0,03± 0,03± 0,05± 0,1± 0,1± 0,1
Weight [kg]0,390,460,831,653,585,7812,417,5
Force- / Moment Rang ULD Force-/Moment Rang

 

Two - Finger Parallel Gripper
with roller bearing

 

 

  • Large opening stroke
  • Low construction
  • Light weight
 
  • Gripper locking device for gripping inside and outside
  • Synchronised gripper jaws

 

Functional principle:

The parallel movement of the finger is accomplished by a jaws and pinion drive. As a result of the pressure of two opposing pistions the jaws move in a synchronised way towards each other.

 

 

OPTIONS:

Sensors
Option C "gripper closed", Option O "gripper open". For the position of the inductive sensors please refer to the technical data of the gripper concerned.

Gripping Force Failsafe valve
A safety device for the gripping force by means of a spring is available as an option. The chuck stroke of the gripper is reduced by 50 %. The safety device can be applied for both inside and outside gripping.
Inside gripping = FS - 1
Outside gripping = FS - A

Pressure Medium
P = compressed air
H = hydraulic oil

 

Technical Data
德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手
ModelRPG 80-PRPG 120-PRPG 120-H
Max. air pressure [bar]88100
Gripping force at 6 bar [N]10001000-
Gripping force at 60 bar [N]--2000
Gripping force at 100 bar [N]--3000
Weight [kg]8,59,010,5
Stroke [mm]80120120
Displacement [cm³]2x1282x1922x23,56

 

Electric Grippers

 

 

The electronic grippers in the EGS series are designed to cope with very difficult applications where a high degree of flexibility is needed.
All systems are of a strong mechanical construction which allows of a maintenance-free operation. To ensure that our system can be used to optimal effect in a wide range of different situations, we have designed 3 basic models for you to choose from.

 

Following basic versions are available:

EGS-EP Compact with a combined electro-pneumatic drive

  • Great flexibility, because the opening width can be adjusted to any size
    you wish via the electric servo drive.
  • Large gripping power and short travelling times via the pneumatic drive
  • Extra measuring capabilities, such as the monitoring of parts dimensions

EGS-E Compact with a regulated electric servo drive

  • Safe handling of sensitive parts
  • Measuring and monitoring functions
  • Can be used in clean rooms

EGS-ELT Light with a simple electric drive

  • In areas where there is no compressed air
  • Especially suited for clean rooms

 

 

Functional principle:
德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手
  • Parallel guiding of the jaws via 2 guide rails for high loads in the gripper jaws
  • Pneumatic drive via 2 double-action pneumatic cylinders
  • Electric drive via gear rods from a central pinion via low-play gearing from a highly dynamic sturdy DC motor
  • Microcontrolled steering integrated in the gripper housing (Typ Compact)
  • Simple standard in the external housing (Typ Light)
  • Execution of any control command via standard digital inlets and outlets
  • Only one power supply (24 V)

 

 

Technical data:
德國IPR <wbr>- <wbr>Inligente <wbr>Peripherienfür <wbr>Roboter <wbr>GmbH工具 <wbr>模塊 <wbr>抓手
Model EGS-250-EP250-E/-ELT375/1-EP375/1-E/-ELT375/2-EP
Gripping force electrical [N]-155-180-
Gripping force pneumatical at 6 bar [N]155-330-330
Duration (for 19mm strokechange in s)0,10,250,150,250,15
Stroke [mm]191925,425,450,8
Repeatability [mm]<0,1<0,1<0,1<0,1<0,1
Electrical performance of servo [W]1025253025
Weight [kg]1,231,281,561,591,56
Max. air pressure [bar]8-8-8
Displacement [cm³]3,75-9,78-19,56
Cylinder bore [mm]16,0-22,22-22,22
Recommended payload [kg]0,50,51,50,751,5

 

Technical data:
Model EGS-375/2-E/-ELT-500/1-EP500/1-E/-ELT500/2-EP500/2-E/-ELT
Gripping force electrical [N]180-330-330
Gripping force pneumatical at 6 bar [N]-690-690-
Duration (for 19mm strokechange in s)0,250,150,250,150,25
Stroke [mm]50,838,138,163,563,5
Repeatability [mm]<0,1<0,1<0,1<0,1<0,1
Electrical performance of servo [W]3040754075
Weight [kg]1,593,23,43,73,9
Max. air pressure [bar]-8-8-
Displacement [cm³]-29,5-49,1-
Cylinder bore [mm]-32,0-32,0-
Recommended payload [kg]0,754242
 Title
NameFeaturesApplicationsView
  
PUL PUL.pdf 德國ASensTec <wbr>GmbH傳感器Miniature offset compensated basic low pressure sensors
  • Pressure range 0...2.5 mbar to 0...75 mbar
  • Output offset compensated
  • Small size
  • Medical instrumentation
  • Environmental control
  • HVAC

德國ASensTec <wbr>GmbH傳感器

ACL ACL.pdf 德國ASensTec <wbr>GmbH傳感器Miniature temperature compensated low pressure sensors
  • Pressure range 0...5 mbar to 0...75 mbar
  • Calibrated and temperature compensated
  • Matched pressure port volumes
  • Small size
  • Medical instrumentation
  • Environmental control
  • HVAC

德國ASensTec <wbr>GmbH傳感器

ACLA ACLA.pdf 德國ASensTec <wbr>GmbH傳感器Miniature amplified low pressure sensors
  • Ranges from 2.5 to 75 mbar differential or gage
  • Precision temperature compensated
  • Calibrated offset and span
  • Extremely low position sensitivity
  • Excellent long term stability
  • Medical instrumentation
  • Environmental control
  • Industrial chemical instrumentation
  • HVAC

德國ASensTec <wbr>GmbH傳感器

PXL PXL.pdf 德國ASensTec <wbr>GmbH傳感器Precision very low pressure sensors / mV-output
  • Ranges from 2.5 to 75 hPa (mbar) differential or gage
  • Precision temperature compensated
  • Calibrated offset and span
  • Extremely low position sensitivity
  • Excellent long term stability
  • Medical instrumentation
  • Environmental control
  • Industrial chemical instrumentation
  • HVAC

德國ASensTec <wbr>GmbH傳感器

PXLA PXLA.pdf 德國ASensTec <wbr>GmbH傳感器Precision very low pressure sensors / Ratiometric 4V-output
  • Ranges from 1 to 75 mbar differential or gage
  • Precision temperature compensated
  • Calibrated offset and span
  • Extremely low position sensitivity
  • Excellent long term stability
  • Medical instrumentation
  • Environmental control
  • Industrial chemical instrumentation
  • HVAC

德國ASensTec <wbr>GmbH傳感器

Single-Chip Technologie


 

 Title
NameFeaturesApplicationsView
  
PCM PCM-C.pdf 德國ASensTec <wbr>GmbH傳感器Precision compensated pressure sensores / mV-output
  • Ranges from 10 mbar to 1 bar absolute, gage or differential
  • Precision temperature compensated
  • Calibrated offset and span
  • Voltage excitation
  • Excellent long term stability
  • Medical equipment
  • Environmental control
  • Industrial chemical instrumentation
  • HVAC

德國ASensTec <wbr>GmbH傳感器

PCM PCM-H.pdf 德國ASensTec <wbr>GmbH傳感器Precision compensated pressure sensores / mV-output
  • Ranges from 10 mbar to 1 bar absolute, gage or differential
  • Precision temperature compensated
  • Calibrated offset and span
  • Voltage excitation
  • Excellent long term stability
  • Medical equipment
  • Environmental control
  • Industrial chemical instrumentation
  • HVAC

德國ASensTec <wbr>GmbH傳感器

PCM PCM-P.pdf 德國ASensTec <wbr>GmbH傳感器Precision compensated pressure sensores / mV-output
  • Ranges from 20 mbar to 1 bar absolute, gage or differential
  • Precision temperature compensated
  • Calibrated offset and span
  • Voltage excitation
  • Excellent long term stability
  • Medical equipment
  • Environmental control
  • Industrial chemical instrumentation
  • HVAC

德國ASensTec <wbr>GmbH傳感器

PXM PXM.pdf 德國ASensTec <wbr>GmbH傳感器Precision compensated pressure sensors / mV-output
  • Ranges from 20 mbar to 7 bar differential or gage, 1 bar absolute
  • Precision temperature compensated
  • Calibrated offset and span
  • Voltage excitation
  • Excellent long term stability
  • Medical equipment
  • Environmental control
  • Industrial chemical instrumentation
  • HVAC

德國ASensTec <wbr>GmbH傳感器

PXMA PXMA.pdf 德國ASensTec <wbr>GmbH傳感器Signal conditioned pressure sensors
  • Ranges from 20 mbar to 10 bar
  • Excellent long term stability
  • Precision temperature compensated
  • Ratiometric 4V output
  • Medical equipment
  • Environmental control
  • Industrial chemical instrumentation
  • HVAC

德國ASensTec <wbr>GmbH傳感器

PXMD PXMD.pdf 德國ASensTec <wbr>GmbH傳感器High precision digital output pressure sensors
  • Ranges from 5"H2O (12.5 mbar) to 7 bar (100 psi) gage/differential or 15 psi (1 bar) to 100 psi absolut
  • Barometric pressure ranges
  • All combined errors over temperature less than 0.1 % typ
  • Wide -20 to 85C or -40 to 125C temperature ranges
  • Enhanced dual serial interface mode
  • Medical equipment
  • Environmental control
  • Industrial chemical instrumentation
  • HVAC
  • Meteorology

德國ASensTec <wbr>GmbH傳感器

AS 1210/1220

Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器

Stainless Steel


 

 Title
NameFeaturesApplicationsView
  
ASS 82

Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器

ASS 83

Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器

ASS 97

Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器

ASS 154

Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器

ASS 5000

Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器

Submersibles


 

 Title
NameFeaturesApplicationsView
  
Hydro

Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器

Food + Process


 

 Title
NameFeaturesApplicationsView
  
Serve 2000

Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器

Serve 8000

Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器

 

Specials


 

 Title
NameFeaturesApplicationsView
  
AB 1620

Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器



Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器



Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器



Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器



Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器



Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器



Datasheet coming soon
 
  

德國ASensTec <wbr>GmbH傳感器

 Singleturn - Vert-X 13E
  • High protection class IP69
  • Very compact dimensions
  • Non-contacting measuring method
  • Very long life
  • High accuracy of measurement
  • Use in cramped installation conditions
Save for later
 Data sheet
Vert-X_13E_5V_eng.pdf

CAD file
Fixation_clip_Vert-X_13E_01.zip
Vert-X_13E3_axial_01.zip
Vert-X_13E3_radial_01.zip
 
 

 Singleturn - Vert-X 22E
  • High protection class IP69
  • Flat design
  • Non-contacting measuring method
  • Very long life
  • High accuracy of measurement
  • Use in cramped installation conditions
Save for later
 Data sheet
Vert-X_22E_5V_10...90_Ub_eng.pdf
Vert-X_22E_5V_PWM_eng.pdf
Vert-X_22E_5V_SPI_eng.pdf
Vert-X_22E_24V_0.1-10V_eng.pdf
Vert-X_22E_24V_0.5-4.5V_eng.pdf
Vert-X_22E_24V_4-20mA_eng.pdf
Vert-X_22E_24V_PWM_eng.pdf
Vert-X_22E_24V_SPI_eng.pdf

CAD file
Fixation_clip_Vert-X_22E_01.zip
Vert-X_22E1_axial_L10.85_01.zip
Vert-X_22E1_axial_L16.85_01.zip
Vert-X_22E1_radial_L16.85_01.zip
Vert-X_22E1_radial_L21.50_01.zip
Vert-X_22E2_axial_L10.85_01.zip
Vert-X_22E2_axial_L16.85_01.zip
Vert-X_22E2_radial_L16.85_01.zip
Vert-X_22E2_radial_L21.5_01.zip
 
 

 Singleturn - Vert-X 27E
  • High protection class IP69
  • Compact dimensions
  • Non-contacting measuring method
  • Very long life
  • High accuracy of measurement
  • Applications under adverse ambient conditions possible (humidity, dampness, oil, dust,
  • vibrations etc.)
Save for later
 Data sheet
Vert-X_27E_5V_10...90_Ub_eng.pdf
Vert-X_27E_5V_PWM_eng.pdf
Vert-X_27E_5V_SPI_eng.pdf
Vert-X_27E_24V_0.1-10V_eng.pdf
Vert-X_27E_24V_0.5-4.5V_eng.pdf
Vert-X_27E_24V_4-20mA_eng.pdf
Vert-X_27E_24V_PWM_eng.pdf
Vert-X_27E_24V_SPI_eng.pdf

CAD file
Fixation_clip_Vert-X_27E_01.zip
Vert-X_27E1_axial_01.zip
Vert-X_27E1_radial_01.zip
Vert-X_27E2_axial_01.zip
Vert-X_27E2_radial_01.zip
 
 

 Singleturn - Vert-X 31E
  • High protection class IP69
  • Compact dimensions
  • Non-contacting measuring method
  • Very long life
  • High accuracy of measurement
  • Applications under adverse ambient conditions possible (humidity, dampness, oil, dust, vibrations etc.)
Save for later
 Data sheet
Vert-X_31E_5V_10...90_Ub_eng.pdf
Vert-X_31E_5V_SPI_eng.pdf
Vert-X_31E_5V_PWM_eng.pdf
Vert-X_31E_24V_0.1-10V_eng.pdf
Vert-X_31E_24V_0.5-4.5V_eng.pdf
Vert-X_31E_24V_4-20mA_eng.pdf
Vert-X_31E_24V_PWM_eng.pdf
Vert-X_31E_24V_SPI_eng.pdf

CAD file
Vert-X_31E5a_01.zip
Vert-X_31E5b_01.zip
 
 

 Singleturn - Vert-X 37E
  • High protection class IP69
  • Very robust design
  • Non-contacting measuring method
  • Very long life
  • High accuracy of measurement
  • Applications under adverse ambient conditions possible (humidity, dampness, oil, dust, vibrations etc.)
Save for later
 Data sheet
Vert-X_37E_5V_10...90_Ub_eng.pdf
Vert-X_37E_5V_PWM_eng.pdf
Vert-X_37E_5V_SPI_eng.pdf
Vert-X_37E_24V_0.1-10V_eng.pdf
Vert-X_37E_24V_0.5-4.5V_eng.pdf
Vert-X_37E_24V_4-20mA_eng.pdf
Vert-X_37E_24V_PWM_eng.pdf
Vert-X_37E_24V_SPI_eng.pdf

CAD file
Fixation_clip_Vert-X_37E_01.zip
Vert-X_37E1_axial_01.zip
Vert-X_37E1_radial_01.zip
Vert-X_37E2_axial_01.zip
Vert-X_37E2_radial_01.zip
Vert-X_37E4_axial_01.zip
Vert-X_37E4_radial_01.zip

收藏該商鋪

登錄 后再收藏

提示

您的留言已提交成功!我們將在第一時間回復您~

對比框

產品對比 二維碼 意見反饋

掃一掃訪問手機商鋪
在線留言