行業產品

  • 行業產品

北京疏水閥門廠


當前位置:北京疏水閥門廠>>疏水閥>>自由浮球式疏水閥-5N

自由浮球式疏水閥-5N

返回列表頁
參  考  價面議
具體成交價以合同協議為準

產品型號

品       牌

廠商性質生產商

所  在  地北京市

聯系方式:祖?zhèn)?/b>查看聯系方式

更新時間:2024-09-26 07:53:40瀏覽次數:82次

聯系我時,請告知來自 制藥網

經營模式:生產廠家

商鋪產品:77條

所在地區:北京北京市

聯系人:祖?zhèn)?(經理)

產品簡介

利用高精度研磨不銹鋼空心浮球在閥腔內隨著凝結水的液位變化開啟或關閉閥門

詳細介紹

利用高精度研磨不銹鋼空心浮球在閥腔內隨著凝結水的液位變化開啟或關閉閥門。該疏水閥的結構比較簡單,主要由浮球和自動排空裝置組成。閥腔內的動作元件——不銹鋼空心浮球,采用高精度研磨工藝制造,整個球面均可做密封面,工作時無集中磨損,使用壽命長 ; 閥腔內無易損件,可靠性高。浮球能根據水位變化而自由調節閥孔的開度,能夠連續排放凝結水,過冷度≈0℃,工作效率高。

自動排空裝置分為兩種 :(低壓PN25以內)液囊熱敏元件組成和(過熱蒸汽系統)雙金屬片組成。

Free-ball float trap

The drain valve is opened or closed by taking advantage of the change of liquid level of condensate water with the high-precision grinding stainless steel hollow float ball in the valve cavity. This steam trap has a simple structure, mainly consisting of float balls and automatic emptying devices. The sole action elements, namely, the stainless steel hollow float ball is manufactured by high-precision grinding process, and its entire sphere can serve as the sealing face and will not be worn intensively during the work, so it has a longer service life. In addition, there is no wearing part in the valve cavity, with a high reliability. The float ball can freely adjust the openness of the valve opening in response to the change of water level and discharge the condensate water continuously with a subcooled temperature of about 0℃ and higher efficiency.
The automatic emptying devices fall into two types : (within low pressure PN25) consisting of reservoir thermo-sensitive elements and (overheated steam system) consisting of bimetals.

優點:

1、轉動的是高精度研磨的不銹鋼浮球,抗腐蝕。
2、結構簡單,維修方便。
3、不受壓力波動的影響,連續排水,噪聲小。
4、裝有自動排空裝置,能夠迅速排除空氣,防止氣堵和汽鎖。
5、體積小,排量大。
6、有水就排,能夠加快系統啟動速度。

Merits

1. The sole moving component is the high-precision grinding stainless float ball, which can resist erosion.
2. Its simple structure is convenient for maintenance.
3. To drain continuously with low noise, without being affected by the fluctuation of the pressure.
4. To be equipped with automatic emptying devices and it can eliminate air quickly and prevent air blocking and steam locking.
5. Small volume and large displacement.
6. To drain whenever there is water left over so as to quicken the startup speed of the system.

主要零件材料/The materials of primary accessories

零部件名稱Part and component name

材質Material

閥體、閥蓋Valve body、valve cover

鑄鐵、鑄鋼、不銹鋼Cast iron、Cast steel、Stainless steel

自由浮球Free float ball

304/316不銹鋼304/316 Stainless steel

閥座Valve seat

高鉻不銹鋼High chrome stainless steel

自動排空氣裝置Automatic air exhaust

不銹鋼、熱敏元件Stainless steel、Thermo-sensitive element

過濾網、罩Filtrating screenCover

不銹鋼Stainless steel



不銹鋼球直徑/Diameter of stainless bal

材質/Material

A,JH3N

B,JH5N

D,JH7N

E,JH9N

F,JH11N

G,JH13N

鑄鐵 Cast iron

50

68

110

150

180

200

鑄鋼 Cast steel

50

70

120

150

190

220




工作原理說明:

在設備剛啟動時,低溫冷凝水和空氣同時進入閥腔,這時開啟自動排空裝置將空氣排除,使低溫凝結水順利進入閥腔,閥腔內的凝結水的液位隨即上升,使浮球升高,開啟閥孔,將凝結水迅速排出 ; 前面的蒸汽很快進入加熱設備,使設備迅速加熱升溫,當蒸汽或較高溫度的凝結水進入閥腔時,自動排空裝置開始膨脹,關閉自動排空氣裝置,疏水閥開始正常工作。這時閥腔內的浮球隨凝結水液位的高低而升降,能連續的排放凝結水。由于自由浮球式疏水閥的閥座孔總處于凝結水液位以下,形成水封,水汽自然分離,工作時達到無蒸汽泄漏。該閥的最小工作壓力為0.01Mpa,從0.01Mpa至工作壓力范圍內不受溫度和工作壓力波動的影響,能連續工作,其最小過冷度約為0℃,由于該閥能自動、連續地排除凝結水,加熱設備內不會有水積聚,能使加熱設備達到理想換熱效率。是生產工藝加熱設備的理想疏水閥之一。

Description of work principle

When the equipment is just started, the low-temperature condensate and air enter the valve cavity at the same time. At this time, open the automatic evacuation device to remove the air, so that the low-temperature condensate can enter the valve cavity smoothly. The liquid level of the condensate in the valve cavity will rise immediately, so that the floating ball will rise. Open the valve hole, so that the condensate can be discharged quickly. The steam in front of the equipment will enter the heating equipment quickly, so that the equipment can be heated quickly and heated up. When the steam or the temperature is lower than When the high temperature condensed water enters the valve chamber, the automatic emptying device starts to expand, the automatic air exhausting device is closed, and the drain valve starts to work normally. At this time, the floating ball in the valve chamber will rise and fall with the level of condensate, which can discharge condensate continuously. Because the valve seat hole of the free floating ball type drain valve is always below the condensate level, forming a water seal, the water vapor is naturally separated, and there is no steam leakage during operation. The minimum working pressure of the valve is 0.01Mpa, from 0.01Mpa to the maximum working pressure range, it is not affected by the fluctuation of temperature and working pressure, and can work continuously. Its minimum supercooling degree is about 0 ℃. Because the valve can automatically and continuously remove the condensate, there is no water accumulation in the heating equipment, which can make the heating equipment achieve the ideal heat exchange efficiency. It is one of the ideal drain valves for heating equipment of production process.

自由浮球式疏水閥 FREE-BALL FLOAT TRAP

技術參數/Technique parameter

殼體壓力等級

Shell

 pressure grade

負荷泄漏率

Load

 leakage rate

使用介質

Used

 medium

殼體材質

Shell

 material

允許背壓率

Permitted

backpressure rate

工作壓差

Maximum

 operating

 pressure

differential

1.6、

2.5、

4.0、

6.4

MPA

≈0%

蒸汽、凝結水

Steam、

Condensate

 water

碳鋼/

304/

316

Carbon

steel

≥80%

4.0MPA


節能效果

Energy

 Saving

 effect

最小過冷度

Minimum

Subcooled

 temperature

排水方式

Drainage

method

允許溫度

Maximum

 Allowable

 temperature

排空氣裝置

Air

 exhaust

system

壓力變化范圍

Pressure

 Change

 range

優秀

Excellence

0℃

連續方式

Continue

 mode

420℃

自動

Automatic

適應

Adaption

外型尺寸和重量/Prime out-form dimensions and weigh

產品型號

Product

 model

口徑(DN)

Calibre

L法蘭

Flange

L螺紋/

焊接

Thread

/welding

H1

H2

W

重量

Weight

使用壓力

范圍(Mpa)

Pressure

 change

range

公稱壓力

(Mpa)

Nominal

 pressure

J5N

15~20

25

-

 

150

160

56

129

110

9

9

0.1-1.2

1.6

J5NF

15~20

25

210

230

-

56

129

110

9

9.2

0.1-1.2

1.6

JH5NF

15~20

25

195

215

-

56

129

110

9.0

9.8

0.1-2.5

2.5-4.0

JH5N40F

15~20

25

230

-

56

129

110

10

0.1-4.0

6.4

JH5N

15~20

25

-

195

215

56

129

110

8.7

0.1-2.5

2.5-4.0

JH5N40

15~20

25

-

230

56

129

110

9.0

0.1-4.0

6.4


排水量/Capacity


注解:
1、選型時請?zhí)峁┕ぷ鲏毫?、工作壓差、凝結水發生量、工作溫度、連接方式及標準。
2、凝結水負荷的安全系數一般為2~3倍。
3、正確安裝、定期保養清除閥內污物,保證疏水閥正常工作和延長使用壽命。
4、裝有自動排氣閥的疏水閥,其凝結水量能夠額外增加300Kg/h。
Note
1. Please provide operating pressure and operating pressure difference, generating quantity of condensation water, operating temperature, connecting mode and standards in selecting product models.
2.The load of condensation water’s safety coefficient reaches 2 to 3 times in general.
3. Please make sure the drain valve is installed properly, maintained regularly, cleaned up and operates under the normal condition, so as to extend its service life.
4.The steam trap, if equipped with automatic exhaust valve, can have the quantity of condensate water increased by 300Kg/h.

其他推薦產品更多>>

制藥網 設計制作,未經允許翻錄必究 .? ? ? Copyright(C)?2021 http://m.hg2288855.com,All rights reserved.

以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,制藥網對此不承擔任何保證責任。 溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。

會員登錄

×

請輸入賬號

請輸入密碼

=

請輸驗證碼

收藏該商鋪

登錄 后再收藏

提示

您的留言已提交成功!我們將在第一時間回復您~