超微機械式粉碎機Superfine Mechanical Pulverizer

一、工作原理及應用范圍介紹  Introduction of Working Principle and Scope of Application

物料在高速旋轉的動齒與特殊葉形結構的定齒剪切力與碰撞力、摩擦力綜合作用下物料發生破碎與細化。在氣流帶動下細粉經旋風分離器進行氣固分離而收集下來，尾氣經布袋過濾凈化回收后排放。廣泛運用于制藥、中藥材粉碎，食品、化工、飼料、農副產品等的粉碎。

The materials are pulverized and refined under the comprehensive actions of shearing force, impact force and friction generated by moving tooth rotating at high speed and fixed tooth with special leaf-shaped structure. The fine powders is collected after being separated for gas and solid in the cyclone separator under the action of air flow, and the exhaust gas is discharged after being purified in the bag filter. It is widely applied in the pulverizing ofpharmaceutical and traditional Chinese medicinal materials, food, chemical, feed and agricultural and sideline products.

二、特點   Characteristics

1. 物料在大量空氣冷卻下進行粉碎。物料不會發生過熱現象。

2. 物料整個粉碎過程不需篩網過濾，連續進行粉碎。

3. 整個過程均在密閉系統內完成，無大量粉塵污染。

1. The materials are pulverized under the cooling of large amount of air without overheat phenomenon.

2. The screening and filtering are not required during the whole pulverizing process, resulting in continuous pulverizing.

3. The whole process is completed in the sealed system with little dust pollution.

三、技術參數（下表中數值僅供選型時參考）

Technical parameters (the values in the table below are for reference in type selection only)

四、工藝流程圖 Process flow diagram

高效風選粉碎機