進口不銹鋼電動隔膜泵

進口不銹鋼電動隔膜泵

I：

II：進口電動隔膜泵的閥體類型：

是隔膜泵選擇中zui重要的環節。隔膜泵閥體種類很多，常用的有直通單座、直通雙座角形、隔膜、小流量、三通、偏心旋轉、蝶形、套筒式、球形等10種。在選擇閥門之前，要對控制過程的介質、工藝條件和參數進行細心的分析，收集足夠的數據，了解系統對隔膜泵的要求，根據所收集的數據來確定所要使用的閥門類型。在具體選擇時，可從以下幾方面考慮：

（1）閥芯形狀結構主要根據所選擇的流量特性和不平衡力等因素考慮。

（2）耐磨損性當流體介質是含有高濃度磨損性顆粒的懸浮液時，閥芯、閥座接合面每一次關閉都會受到嚴重摩擦。因此閥門的流路要光滑，閥的內部材料要堅硬。

（3）耐腐蝕由于介質具有腐蝕性，在能滿足調節功能的情況下，盡量選擇結構簡單閥門。

（4）介質的溫度、壓力當介質的溫度、壓力高且變化大時，應選用閥芯和閥座的材料受溫度、壓力變化小的閥門。

（5） 防止閃蒸和空化閃蒸和空化只產生在液體介質。在實際生產過程中，閃蒸和空化不僅影響流量系數的計算，還會形成振動和噪聲，使閥門的使用壽命變短，因此在選擇閥門時應防止閥門產生閃蒸和空化。

進口電動隔膜泵技術參數：

zuida流量：12.8-480L/min
zuida揚程：40-70m
出口壓力：0.4-0.7MPa
口徑：10-125mm
轉速：1450r/min
電機功率：0.55-5.5kw
zuida虹吸高度(干抽或濕抽)：3-6m
zuida輸送固體顆粒：2.5-9.4mm
每往復流量：0.15-7.6L
zuida往復速度：63-85cpm

III: 輸送介質:

1． 泵吸花生醬、泡菜、土豆泥、小紅腸、果醬蘋果漿、巧克力等。

2． 泵吸油漆、樹膠、顏料。

3． 粘合劑和膠水、全部種類可用泵吸取。

4． 各種瓦、瓷、磚器及陶器釉漿。

5． 油井鉆好后，用泵吸沉積物及灌漿。

6． 泵吸各種乳化劑和填料。

7． 泵吸各種污水。

8． 用泵為油輪，駁船清倉吸取倉內污水。

9． 啤酒花及發酵粉稀漿、糖漿、糖蜜。

10．泵吸礦井、坑道、隧道、選礦、礦渣中的積水。

IIII美國泰樂TYLER進口不銹鋼電動隔膜泵售后服務：

用戶第1，信譽第1，優質、完善的售后服務是我們產品價值的延伸和對客戶利益的重要保證，我公司服務質量管理體系的宗旨是：建立并不斷完善科學、合理、高效的服務質量管理體系，公正、準確、及時地完成客戶的售后服務質量保障工作，為我公司的客戶服務建立良好、全面、充分的服務體系。

Imported stainless steel electric diaphragm pump imported electric diaphragm pump

I:

II: imported electric diaphragm pump valve type:

Diaphragm pump selection is the most important link. Many types of diaphragm valve, commonly used through single seat, through two seater angle, diaphragm, small flow, three links, eccentric rotation, butterfly sleeve style spherical 10. In the choice of the valve prior to the media, process conditions and parameters to control the process of careful analysis, to collect sufficient data to understand the system requirements on the diaphragm, according to the data collected to determine the type of valve to be used. In the specific choice, can be considered from the following aspects:

(1) the shape of the valve core is mainly based on the selected flow characteristics and unbalanced forces.

(2) wear resistance when the fluid medium is a suspension containing a high concentration of abrasive particles, the spool, the valve seat surface will be closed every time a serious friction. Therefore, the valve flow path to be smooth, the valve should be hard to internal materials.

(3) corrosion resistance due to the corrosive medium, to meet the regulatory function of the case, as far as possible to choose the simple structure of the valve.

(4) medium temperature, pressure, when the medium temperature, high pressure and large changes, should choose the valve core and valve seat material by the temperature, pressure changes small valve.

(5) to prevent flashing and flashing and cavitation cavitation produced only in liquid medium. In the actual production process, steam and air not only affects the calculation of flow coefficient, but also the formation of vibration and noise, shorten the life of the valve, so the choice should be to prevent the valve valve steam and cavitation.

Technical parameters of imported electric diaphragm pump:

Most Da traffic: 12.8-480L/min

The most Da head: 40-70m

Outlet pressure: 0.4-0.7MPa

Caliber: 10-125mm

Speed: 1450r/min

Motor power: 0.55-5.5kw

Da siphon height (dry or wet):3-6m

Most Da conveying solid particles: 2.5-9.4mm

Each reciprocating flow: 0.15-7.6L

Most Da reciprocating speed: 63-85cpm

III: transport medium:

1 pump peanut butter, pickles, mashed potatoes, red sausage, jam apple syrup, chocolate, etc..

2 pump paint, gum and pigment.

3 adhesive and glue, all types of pumps can be used.

4 kinds of tile, porcelain, brick and pottery glaze.

5 after the well is drilled, the pump is used to pump the sediment and grout.

6 pump all kinds of emulsifiers and fillers.

7 pump all kinds of sewage.

8 pumps for the tanker barge Warehouse Clearance absorb water.

9 hops and yeast slurry, syrup and molasses.

10 pump shaft, tunnel, tunnel, ore dressing, slag in the water.

The United States imports of stainless steel TYLER IIII Taylor electric diaphragm pump service customer service:

First users, first credit, quality, perfect customer service service is an important guarantee for extending our products and value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.