應用 | PCB分板機切割雕刻電主軸 | Applications | PCB routing |
外殼夾裝尺寸 | 33 mm | Clamping diameter | 33 mm |
馬達類型 | 3相異步高速電機 | Motor system | 3 Phase asynchronous motor |
轉速范 | 6.000 – 100.000 min-1 | Speed range | 6,000 – 100,000 rpm |
額定電壓 | max. 60 V | Voltage | max. 60 V |
電流 | max. 8 A | Current | max. 8 A |
扭矩 | max. 8,4 Ncm | Torque | max. 8.4 Ncm |
頻率 | 100 - 1.666 Hz | Frequency | 100 - 1,666 Hz |
功率 | max. 500 W | Output power | max. 500 W |
重量 | 1,0 kg | Weight | 1.0 kg |
軸承 | 3 x陶瓷軸承, 油脂潤滑 | Bearing system | 3 x Hybrid, lifetime lubrication |
防護等級 | IP 55/57 (加密封氣) | Protection category | IP 55/57 (with sealing air + optional accessory: sealing cap 2001 2618) |
電機保護 | KTY | Motor protection | KTY |
安裝位置 |
| Working position |
|
負載方向 | 徑向 + 軸向 | Load direction | axial + radial |
錐面跳動 | ≤ 1 μm | Run-out (taper) | ≤ 1 μm |
夾持范圍 | 至 Ø 4.0 mm | Chuck clamping range | up to Ø 4.0 mm |
換刀方式 | 壓縮氣 5 - 6 bar (管內經 Ø 4 mm) | Tool change | pneumatic 5 - 6 bar (hose Ø 4 mm) |
冷卻系統 | 外夾具冷卻 | Cooling system | Cooling via clamping bracket |
| 防水防塵措施 | 密封氣 27 Nl/min (管內經 Ø 4 mm) | Protected against dirt | Sealing air 27 l/min@STP (hose outer Ø 4 mm) |
外殼材料 | 不銹鋼 | Housing material | Stainless steel |
*變頻器 | e@syDrive® 4310(IP00)*, 4320(IP00)*, 4425*, 4426,TV4503*,TV4504,TV4506 | Inverter recommendation | e@syDrive® 4310(IP00)*, 4320(IP00)*, 4425*, 4426,TV4503*,TV4504,TV4506 |
| 特性 | 導靜電 | Highlights | Electrostatic discharge |
| 保留修改權 | Subject to change without notice |
下載參數表
采購中心
