德國Mutec GmbH數碼音頻產品 接口 模塊

德國STRACK NORMA GmbH & Co. KG工具標準件

德國VS Sensorik GmbH編碼器 傳感器 開關

產品系列：

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

Incremental rotary encoders with analog outputs

For each tooth of the gear wheel, a Sinus and a Cosinus signal are generated. In addition, the device creates of a reference pulse for each revolution of the gear wheel.

• Signals SIN, COS and Ref. with 1Vss
• High temperature stability of the signal parameters Offset and Amplitude
• Individual signal corrections using adjustment potentiometers possible
• safety integrated
• Optional: serial EEPROM in order to write and read data
  
  
           
  
   

	Carakterisation	Comment
Serie RGM2G	Magnetic gear wheel encoder RGM2 series - Overview Order identfiers
RGM2G-A .../P	Magnetic gear wheel encoder for gear wheels  with M= 0.3 or 0.5 Standard cable configuration	available
RGM2G-A .../T	Magnetic gear wheel encoder for gear wheels  with M= 0.3 or 0.5   Modified cable configuration	available
RGM2G-A .../DM	Magnetic gear wheel encoder for gear wheels  with M= 0.3 or 0.5 17-pin flange socket on mounting base, with T-cable	available
RGM2S-A	Magnetic gear wheel encoder for gear wheels  with M= 0.3 or 0.5 Compatible with SIZAG sensor from Siemens	available
RGM2G-FAQ´s	Frequently asked questions about mag. gear wheel encoders  series RGM2G
SGM2G-A	Magnetic gear wheel encoder for ferromagnetic gear wheels  Compatible with SIMAG sensor from Siemens	available
RGK2G-A	Magnetic gear wheel encoder for gear wheels  with M= 0.3 or 0.5 With potentiometers for fine-tuning of signal parameters Substitution of gear wheel encoder series RGK2M	available
RGK2G-A...X	Magnetic gear wheel encoder for gear wheels  with M= 0.3 or 0.5 With I2C-interface Substitution of gear wheel encoder series RGK2M	available
ZR3-256/Di	Measuring gear wheel with module M= 0,3 and N= 256 Integrated Ref.-mark, designed as "tooth" Robust construction for rpm up to 100.000 1/min	available
ZR3-128/Di	Measuring gear wheel with module M= 0,3 and N= 128 Integrated Ref.-mark, designed as "tooth" Robust construction for rpm up to 100.000 1/min	on request
ZR5-256/Di	Measuring gear wheel with module M= 0,5 and N= 256 Integrated Ref.-mark, designed as "tooth" Robust construction for rpm up to 100.000 1/min	available
ZR5-128/Di	Measuring gear wheel with module M= 0,5 and N= 128 Integrated Ref.-mark, designed as "tooth" Robust construction for rpm up to 100.000 1/min	on request
ZR5-64/Di	Measuring gear wheel with module M= 0,5 and N= 64 Integrated Ref.-mark, designed as "tooth" Robust construction for rpm up to 100.000 1/min	on request
PB-RGMA-USB	I2C-interface box for fine-tuning of encoder signal parameters   Software ProCal	on request
DCMU16 & 32	Digital calibration and measurement unit   Fine-tuning of encoder signal parameters via I2C-interface (software ProCal) Detailed analysis of the encoder signals and the quality of measuring gear wheels (software TRIM & ZRHS) 4-channel-oscilloscope (software OSZI) Software for customized applications	on request

Incremental rotary encoders with digital outputs 

Interpolation electronics are integrated in sensors. Depending on the factor of the interpolation F (for example F=4, 10, 64 or 512), two square wave signals A and B each with F x N (N=numer of teeth of the gear wheel) impulses per revolution are provided.

• Signals A, B and Ref.      RS422, TTL or HTL
• Duty circles A and B       50% +/-10%
• Phase shift A/B              90° +/-45°
  
   

                   


















 data sheets:   KWG2D    KWG2H    KHG2D    RGM2G-D

 gear wheels:   ZR3-256/Di    ZR5-256/Di

Pulse Sensors

Measuring principles and characteristics

The magnetic pulse sensors are suited for the contact free detection of gear wheels and gear racks starting from a teeth module value of M=0.75. As measuring scale, slot discs, bolt heads as well as other steel marks can be used for this purpose. The sensors feature high robustness and a wide temperature stability. A high pressure resistance of up to 500 bar (also dynamic) is achieved by use of sealed metal housings.

• Detection of rotating direction is possible
• Type of signal: Open-Collector NPN or PNP, Push-Pull and more
• Voltage supply possible up to 32 VDC
• Output current possible up to 200mA
• Operating temperature -40 up to 125°C (150°C)
• Operating frequency:  series HDI     0.010 ... 20kHz
                                      series HMX    0 ... 15 kHz
• Sealed, pressure-resistant metallic housing for two canal design starting from a diameter of 10mm and M12x1 respectively
• High resistance against external sources of magnetic disturbance
• High stability to vibrations and shocks

Applications

Measuring of rotation speed and rotation direction for instance in transmission gear boxes, wheel bearings, drive systems and vehicles.

 data sheets:   HDI2    HMX2

Proximity switches

Measuring principles and characteristics 

The magnetic proximity switches represent an alternative to the well known inductive sensors. Using existing magnetic systems within the sensors, steel gear wheels or racks are evaluated without any contact. Non-magnetic elements do not influence the operations. The sensors are characterised by high operation frequencies and a high temperature stability. A high pressure resistance of up to 500 bar (dynamic as well) is achieved by use of sealed metal housings.

• Switching distances up to 8mm - other on request
• Selective identification of ferromagnetic switching marks
• Embedded or non-embedded versions
• Type of signal: Open-Collector NPN or PNP, Push-Pull et al.
• Voltage supply possible up to 32 VDC
• Output current possible up to 200mA
• Operating temperature -40 up to 110°C - other on request
• Operating frequency 0 up to 15 kHz
• Sealed, pressure-resistant metallic housing starting from M12x1
• High stability to vibrations and shocks

Applications

Detection of switching marks in hydraulic systems, drive propulsion systems for vehicles and ships.

 data sheets:   PHS1

• More information about Thermocouples: Download data sheet

  • Type K: Ni-Cr (+) / Ni-Al (-)

  • Type N : NiCrSi (+) / NiSi (-)

  • Type J: Iron (+) -/ Constantan® (-)

  • Type E: Ni Cr (+) /  Constantan® (-)

  • Type T: Copper (+) / Constantan® (-)

  • High temperature thermocouples

  Type S: Pt 10 % Rh (+) / Pt (-)
  Type R: Pt 30 % Rh (+) / Pt (-)
  Type B: Pt 30 % Rh (+) / Pt Rh (-)

  • The tungsten-rhenium thermocouples

  Type C (rigid or flexible):
  Tungsten-rhenium 5 % Re (+) -
  Tungsten-rhenium 26 % Re (-)

  Other thermocouples

  • Standard off-the-shelf thermocouple range

  • Stick-on thermocouples

   

ATEX Temperature sensors

The thermocoupes and RTDs range covers Ex Zones 0 to 2 and 20 to 22.

• Zones 0 and 1: intrinsic safety - marking "EEx ia" in accordance with EN 50020.

• Zone 2: Energy Limited Circuit - marking "EEx nL" in accordance with en 50021

The same technical properties as for thestandard thermocouple range apply for these sensors. Only the fitting and some used components are adapted to the ATEX requirements. Technical details are available in the document SE900R009

ATEX heating

The Relevant Protection Principle for THERMOCOAX heaters are:

• Zone 1 and 2: flameproof enclosure marking "EEX d" in accordance with EN 50018.

  The heaters properties are those of the standard range. Details are given in the heating product range.

  ATEX Questionnaire

  As for any product intended for potentially explosive atmospheres, a dedicated questionnaire has to be filled out prior order execution.

  Please download the form: ATEX questionnaire.pdf and fill it out directly. Once completed, print it, add your company stamp and signature and post it to our sales department.

Mineral Insulated
Signal Transmission Cables

Thanks to their exceptional properties, THERMOCOAX cables can:

Be used in the most aggressive media:

• high pressure, vacuum, corrosive liquids or gases, vibrations, nuclear

  Withstand very high insulation resistance:

• over  to 10¹³ Ohms

  Resist to very high temperatures

• work up to 1200°C

  Carry relatively high currents

• as well as very low signals at high frequency

  Be welded

• or brazed onto any piece or to pass through a wall.

   

  Dedicated applications for

• Nuclear energy
• Aeronautics, Defence and Space
• Cryogenic processes
• Chemistry and petrochemistry
• Vacuum technology
• Hydraulic systems
• Steam and gas turbines
• Robotics

More information about MI cables:
Download data sheet

• Single conductor

• Multi conductors

• Low capacitance for hyperfrequency signals

• Coaxial and triaxial for high frequency

The COFRAC calibration

THERMOCOAX metrology department is accredited by the COFRAC Calibration Section under the registration number 2.1384 referring to calibration at fixed points of the thermoelectrical couples.

Oven 2000°C                     Thermal cycling

Controls and tests

Systematic controls guarantee the quality of the THERMOCOAX products :

• X-ray of the hot junction,
• sheath integrity test,
• metallographic test on sample,
• calibration with appropriate thermal treatment
• dimensional
• electromotive forces (ITS90).
• certificate of compliance on request

Specific sensors

High temperature Capacitive Sensors TURBOCOAX

The TURBOCOAX capacitive sensors were developed to measure the clearance between the tip of the turbine blades and the casing of turbo engines.

• Non-contact blade tip clearance measurement
• No cooling system required
• Small dimensions
• Withstand temperatures up to 1,400°C

  Other applications:

• Speed and/or counting measurements,
• Level or thickness, vibrations

  NEGACOAX® overheating and fire detectors

  The linear sensors NEGACOAX, to detect overheating and fires, are all constructed employing the mineral insulated cable technology.

  Applications:

  Chemical and petrochemical industries

• temperature control and survey of processes

  Aerospace industries

• jet engine and structure

  Space industries

• rocket thrust, detection of leaking hot gas

  and any other industry where the safety aspect is a key factor.

  Traffic control with VIBRACOAX® Weigh-In Motion sensors

  When used with appropriate instrumentation, VIBRACOAX can provide a wide range of information including:

• Weigh-in-Motion(WIM)
• Vehicle classification
• Axle counting and distances between axles
• Gross vehicule and load distribution
• Speed measurement
• Traffic volume

  THERMOCOAX manufactures the VIBRACOAX piezoelectric axle sensor since the mid 1970s. The sensor is used in data collection applications. The sensor is highly accurate and reliable with tremendous longevity and generally outlives the pavement in which it is installed.

  NEUTROCOAX® neutron detectors by SPND

  The NEUTROCOAX SPND is a neutron absorber material called emitter, insulated from the sheath or collector by alumina or magnesia insulator in a coaxial geometry.

  The SPND is connected to an amplifier by a single lead or twin lead THERMOCOAX coaxial cable capable of correcting the spurious current due to the irradiation of the cable.

  The THERMOCOAX SPND can be used in all types of reactors for in-core measurement of thermal neutron flux for:

• good knowledge of the neutron flux distribution
• monitoring the energy conversion in the reactors
• a better control of the safety criteria.

  Applications:

• accurate monitoring of thermal neutron flux,
• in irradiation experiments or instrumentation

Download brochure: TURBOCOAX

Download brochure: NEGACOAX

Download brochure: VIBRACOAX

Download brochure: NEUTROCOAX

	SN4168 u. SN1727, SNS sintered metal Sliding elements

	SN5650 Sum of ideas: production. The cam series PowerMax?/a>

	Z4077-R, Z4078-R, W33-R und W35-R Guide bushes ?low maintenance

	Z5350-Q und Z5350-L Compact, practical and good: the new block cylinders

	Z5450 core cooling for Unscrewing units Z5410/ 20/ 30

	R1025 / R1026 Automatic transport lock

MUTEC offers custom designed memory expansions and different interface boards like SCSI, AES/EBU + S/PDIF digital i/o, ADAT™ i/o as well as analog output expanders for samplers and hard disk recorders. Herewith newer and older types are considered and available from stock like for AKAI S950, S1000, S3000 S5000, S6000, MPC2000/-XL, etc., Dynacord ADS, Yamaha TX16W and many more.   DIB-01   DIB-02 DIB-03 DIB-04   DIB-05 DIB-06 ADO-01 ADO-02

MUTEC offers custom designed memory expansions and different interface boards like SCSI, AES/EBU + S/PDIF digital i/o, ADAT™ i/o as well as analog output expanders for samplers and hard disk recorders. Herewith newer and older types are considered and available from stock like for AKAI S950, S1000, S3000 S5000, S6000, MPC2000/-XL, etc., Dynacord ADS, Yamaha TX16W and many more.

 

DMC-01	DMC-02	DMC-03
DMC-04	DMC-05	DMC-06
DMC-07	DMC-08	DMC-09
DMC-10	DMC-11HD	FMC-01
FMC-02

Standard SIMM (30pin), PS/2 (72pin), DIMM (168pin) MUTEC offers special tested memory modules (SIMMs) with capacities between 1MByte and 512Mbyte for the use in digital musical instruments like samplers, synthesizers or workstations. Furthermore the old standard 30pin-SIMMs are still available! For up-to-date devices we are supplying compatible SDRAM DIMMs in any capacities. Special types of modules can be produced through our module-manufacturers.   We offer ADAT™ + S/PDIF compatible fiber optical cables with 9 different lenghts: 0,5m; 1,0m; 2,0m; 3,0m; 5,0m; 7,5m; 10,0m; 15m and 20m.