Gear units and geared motors

Geared motors of the highest quality

Watt Drive gear units and geared motors are based on the WATT MAS Gear and Motor Sytems and encompass

                  - Helical-,
                  - Shaft mounted-,
                  - Parallel shaft-,
                  - Helical worm-,
                  - Helical bevel- and
                  - Angle parallel shaft gears (geared motors)

in foot, flange, uniblock or shaft-mounted gears with full or hollow shaft.


Using the WATT MAS gear and motor system, it is possible to implement reliable and economical solutions in a very short time that are customized to your particular call for use.


The characteristics of modular Watt Drive gear technology meet all the criteria of the most modern drive systems:

   ?Outstanding power spectrum
   ?Minimal back lash
   ?Excellent running
   ?Smoothness
   ?Diverse mounting possibilities
   ?Maximum operational safety
   ?High variability
   ?Customer-oriented torque / overall size

EUSAS-System motors

A Motor for 100Hz Characteristic and Any Voltage Worldwide !

Drive Electronics The frequency inverter programs S-line, B-line, E-line and P-line consistently follow the same principle in the range of 0.2 to 90 kW as the Watt Drive modular drive systems. These frequency inverters distinguish themselves through their excellent control features, compact size, ease of use and very good communication skills. The differences between the four programs lie primarily in the control features and thus the starting torque and dynamic performance achieved. The S models are V/F controlled, while the B, E and P range consists of vector-controlled frequency inverters. The E-line offers implemented EMC filters and brake choppers in series, as well as many possible extensions for the digital and analog in- and outputs. Moreover an integrated SPS control is available. The P range features distributed inligence e.g. for positioning tasks. This complete range of modular drive control units offers the technically best and most cost-effective drive solution for any requirement, from simple open loop control to top dynamic closed loop process control and positioning applications. Watt Drive is able to offer a complete range of modular drive control units and the most cost-effective drive solution for any requirement, from simple control and drive tasks to the control of top dynamic processes and positioning. S-line VFD-S Performance area: 0.25kW - 2.2kW [1/3HP up to 3HP] B-line VFD-B Performance area: 0.75kW - 75kW [1HP up to 100HP] E-line VFD-E Performance area: 0,75kW - 22kW [1HP up to 30HP] P-line P6000 Performance area: 0.75kW - 90kW [1HP up to 120HP]

Manuals Programming software Frequency inverter flyer

Explosion-protected drives Watt Drive gear units observe the 94/9EG (ATEX 95) directives. In accordance with the new directive, the explosion-protection norm has been extended to include non-electrical operating resources. Requirements have been set up to regulate the provision or use of devices and protection systems for their intended use in explosive areas. Watt Drive gear units fulfil these requirements for operating resources and thus ensure reliable line operations when put to use in explosive areas. Gear units in line with ATEX can be used for gas (G) as well as for dust explosion control (D). ATEX approval has been given for the following explosive areas: Equipment group I category M2: I M2 c Equipment group II category 2:    II 2G c T4                                                     II 2D c 120癈 Equipment group II category 3:    II 3G T4                                                     II 3D 120癈 The gear unit, in accordance with ATEX, adheres to the highest quality standards: ?Gear units are equipped with an impact-safe protection cap for hollow shaft or shrink disc version ?Screws are protected against coming loose ?Own ATEX - nameplate ?Oils with a higher temperature resistance are used ?Ventilation of the gear unit is executed via a special high pressure ventilation valve For further information please see our Newsletter "WATT gear units confirming to the EU - guideline 94/9/EC (ATEX 95)". See in Newsletter archive column "other".

ATEX-Manual BA04

Agitator drives Agitator and extruder drives - reliability that meets the highest demands. The agitaor drives of the Watt Drive company are part of the modular gear system in the MAS program. Aim of development was maximum sealing protection and a long storage product life while at the same time providing extremely reliable radial and/or axial power. What resulted from these guidelines were gear units that alongside these requirements offer these further optional features: ?Rust-protected brakes ?Greater corrosion protection (special coating for     increased atmospheric conditions) ?A variety of motor options (auxiliary heating system, ? ?Niro nameplates ?Oil inspection glass ?If necessary, special lubricant ?High pressure ventilation valve ?Oil level sensor ?... The agitator drives are available in the following models: ?Shaft mounted geared motors AR.           Power: 0.12 - 18.5kW           Torque: 400 - 1,500Nm ?Parallel shaft geared motors FR.           Power: 0.18 - 55kW           Torque: 2,800 - 14,000Nm ?Helical bevel geared motors KR.           Power: 0.12 - 55kW           Torque: 1,000 - 14,000Nm The gear units are available with hollow shafts, hollow shaft with shrink disc and output shaft. For further information please see our Newsletter "Agitator-, Extruder drive - reliability for highest demands". See in Newsletter-archiv, column "Product news (mechanical)". See in Newsletter archive column "Product news (mechanical)".   Special solutions If you are looking for a complete drive system or single components that cannot be implemented from a standard model, then we are the right people to contact. Our product range can be customized by our application engineers to suit your requirements. The already described special drive units were developed according to customer requirements. Increased customer use while observing the highest quality standards has top priority. Our drive unit solutions are in operation in almost all four corners of the world and receive acclaim due to their high reliability and long product life.   Gear units up to 120 kNm Innovative total solutions up to 120 kNm. All-inclusive project solutions from systems suppliers are valued and actively requested by many customers around the world. To meet this demand, Watt Drive is expanding its product range thanks to collaboration with a central European gear manufacturer. This collaboration means that Watt Drive is able to offer the F.. parallel shaft gear unit and the K.. helical bevel gear unit series up to 120 kNm with many additional options across the range. F.. RX 8.. and K.. RX 8.. series: The parallel shaft gear units F.. RX 8.. have a 1 - 4 stage design and therefore cover a large reduction range. The thermal power limit of the gear units are between 5.5 kW and max. 445 kW. The helical bevel gear units K.. RX 8.. have a 1 - 3 stage design, covering thermal power limit 14 kW up to 304 kW. Gear data:                       - Power: 5.5 - 445 kW                       - Output torque: up to 120,000 Nm                       - Ratio: 1.1 - 800 Output shaft versions: The following output shaft designs are possible:    ?Solid shaft    ?Hollow shaft and    ?Hollow shaft with shrink disk Input shaft versions: The motor can be attached using an IEC coupling adapter for models IEC 71 - IEC 315. Gear unit designs with a free input shaft for attaching various coupling types are also possible.           Gear unit options:    ?Backstop devices in the gear unit    ?Labyrinth seal rings    ?Reinforced bearings    ?Fluid couplings    ?Elastic couplings    ?Swing base    ?Gear cooling systems For further information please see our produt flyer "WATT gear units up to 120 kNm" under the section >> Downloads - Flyer Flyer order

Electronic product catalogue - cat4CAD

單回路溫度控制器

多回路溫度控制器

功率控制器

• SERIES SD
• SERIES 96
• SERIES 988/989
• SERIES F4P
• SERIES PD
• MICRODIN®

• SERIES 998/999
• SERIES PD
• SERIES CLS200
• SERIES MLS300
• SERIES D8

• Style A
• Style B
• Style C
• Style D

開關

• SERIES CV
• SERIES CF
• SERIES 80M6

PID(具有時間溫度/曲線繪制功能)

• SERIES CLS200
• SERIES MLS300
• SERIES F4D
• SERIES N7
• MINICHEF^® 2000

CZR系列

PID(具有時間/溫度曲線繪制功能)

• SERIES SD
• SERIES 96
• SERIES 981/982
• SERIES F4S

限制/警報

• TLM-8
• CAS200 Scanner

功率控制器系列 

限制/警報

• SERIES LV
• SERIES LF
• SERIES SD
• SERIES 97

PID( 具有可編程邏輯功能)

• CPC400
• PPC-2000

混合型

• E-SAFE Relay^®
• Solid State Relays
• QPAC - SCRs

溫度儀表

• SERIES TM

控制臺

控制面板及控制箱

特征

優點

以太網/因特網連通性

允許用戶遠程操作以及監控其過程

嵌入式網絡服務器

通過標準網絡瀏覽器進行遠程操作以及過程監控

網頁設計

網頁設計特別考慮了使用和操作的簡便性

警報通知

降低過程監控成本

WATVIEW通信功能

允許用戶使用相同的PC連接操作WATVIEW或瀏覽器

WATVIEW軟件有三種版本可供選擇：

• WATVIEW結構版本：只包括電子數據表的顯示、設置屏幕以及沒有日歷啟動的軟件，此版本可免費下載，為www.watlow。。ｃｏｍ

• WATVIEW運行時間版本：包括結構版本的所有功能，以及警報管理、日歷啟動的用戶事件日志、數據記錄還有趨勢圖。

• WATVIEW開發商版本：包括運行時間版本的全部功能，以及客戶屏幕設計軟件和用戶自定義變量。

WATCONNECT為瓦特隆基于Windows®的軟件數據庫，用于ModbusTM RTU 以及ModbusTM TCP 通信。該軟件套件可方便程序員使用Visual Basic, C, C++ 以及Visual C++開發Windows® 應用程序，這些程序通過ModbusTM RTU以及ModbusTM TCP協議與瓦特隆控制器進行通信。界面的簡潔性可確?？s短人機界面或其他應用程序（與控制器進行通信）的學習周期與開發時間。
該套件的主要優點在于程序員無需學習ModbusTM 協議、Windows®串行端口或以太網通信的詳細知識，即可成功開發能夠讀取和設置控制器參數的程序。
ModbusTM RTU DLL提供4個便于使用的功能：開啟端口、關閉端口、讀取數據和寫入數據。如需使用這些功能，程序員只需了解通信端口設置，以及所需數據的地址，這些信息可在控制器文檔中查詢。

特征

優點

可實現與247個控制器之間的通信

• 可升級

對于多線程應用程序具有安全性

• 程序的若干部分可使用相同的通信端口

單源解決方案

• 無需多個銷售商
• 確保兼容性
• 省時、經濟

許可協議允許用戶編寫的應用程序免費發布

• 應用程序無循環費用

為Visual C++, Visual Basic 以及多線程C用戶提供代碼示例

• 示例簡單易學，學習周期短

讀取和寫入所有標準Modbus™數據表：線圈、輸入和寄存器

• 允許訪問所有控制器參數

可處理自定義名稱的端口，例如串行端口擴展器

• 功能靈活

NAFEM 數據協議網關，用于使用ModbusTM RTU的設備 Watlow ON-LINE KITCHENTM 網關是一種*的多功能設備，提供北美食品設備制造商聯合會 (NAFEM) 數據協議 (NDP) 通信以及網絡功能。該網關還提供警報功能，可連接多個使用ModbusTM-RTU協議的設備，以及用于配置的Windows® 軟件。
設備制造商可迅速、簡便的為帶有MODBUSTM RTU 接口的設備提供NDP兼容性標準功能，也可作為售后市場選配功能。系統整合商可利用基于Windows®的配置軟件，能夠迅速映射信息。

特征

優點

• zui多可自動輪詢8臺使用ModbusTM-RTU協議的遠程設備

• 提供NDP通信功能，無需修改以前的設備
• 可加速檢索過程 - 因為當前數據在查詢命令到達時保存在網關內
• 減少由于慢速串行連接超時導致的網絡阻塞
• 通過支持多臺設備，降低成本，簡化網絡

• 實施所有七種NAFEM企業管理信息數據庫

• 通過即插即用兼容性，簡化了與兼容NAFEM 2.0版本企業應用程序的集成過程

• 可提供基于Windows®的網關配置軟件

• 可通過NAFEM管理信息數據庫輕松連接ModbusTM寄存器
• 通過在網關之間復制配置，可加速多個網關的設置過程
• 可實現任何能夠通過網絡訪問的網關遠程配置

• 使用密碼的安全服務

• 保護網關以及設備不被篡改

• NDP警報器提供主動式警報信息

• 無需輪詢設備的警報條件，可簡化企業應用程序以及降低網絡阻塞

• 網關從TFTP 服務器獲取更新及設備配置

• 簡化升級過程
• 通過自動設置更改功能，使設備配置的更改更簡單
• 與發送多個信息配置設備的方法相比，可降低網絡阻塞

應用

• 油炸鍋
• 烤爐
• 熏箱
• 平鍋
• 烤架
• 送餐系統

• 加熱箱
• 烹調以及固定設備
• 重復熱化器
• 面團貯存器
• 組合設備
• 冰箱及制冷機

ANAWIN® 3人機界面 (HMI) 軟件是使用于Window®界面的簡易多功能設置以及瓦特隆PPC-2000 控制器的監控軟件包。
ANAWIN 3界面軟件包支持瓦特隆 CLS200 以及MLS300控制器，提供標準功能和ramp and soak功能。高級模塊化軟件設計，結合瓦特隆在多回路溫度控制方面的專業技術，使ANAWIN3非常適合新型溫度控制器的各種應用場合。作為瓦特隆整個加熱解決方案的一部分，ANAWIN3可利用簡單、友好的圖形格式連接溫度控制器、功率控制器、加熱器以及傳感器。只需將其安裝在任何運行Windows® 98, NT 4.0, ME, 2000 以及 XP Professional桌上型電腦或筆記本電腦，即可對關鍵過程進行配置、監控以及維持操作。

LOGICPROTM是一種基于Windows® 的圖形邏輯編程軟件包。LOGICPRO是對應于強大的多回路PID控制功能（如PPC-2000 以及 CPC400）的*工具?？扇芜x一至三種邏輯編程語言開發程序：梯形圖，順序功能圖或者功能方框圖。

主要產品 :

  集成控制系統 － 多功能子面板、*控制面板以及系統控制設備接線

  熱、電、機系統 － 在機電裝配系統中嵌入集成優化的熱組件

  升級工具包

應用：

分析儀器燃料電池與其它電源設備

生物科技儀器病患看護設備

臨床診斷儀器半導體加工設備

飲食服務設備

瓦特隆設計并制造全套加熱系統，可滿足您的特殊過程系統應用要求。由于瓦特隆是 可提供設計并制造熱系統的所有組成部件, 包括加熱器、傳感器、控制器以及軟件，因此瓦特隆的過程系統能夠為您的需求提供zui有效的熱系統解決方案。
瓦特隆熱系統的所有部件都通過嚴格的質量控制檢驗標準。我們的工程師可與您的技術人員密切合作，確保您的系統設計*符合規格。在生產之前，我們會將具體并通過審核的草案交客戶過目，征求你的批準，確保你的系統符合當?shù)睾图夹g標準。
瓦特隆過程系統團隊深知意外的停機會給您的公司帶來巨大損失，因此我們的設計采用了以下特征：

• 輪箍加熱器上使用特大型外殼，配有用于饋電線連接的接線板
• 高溫、絕緣外殼，以及200°C (392°F)配線
• 輪箍加熱器以及容器沖壓符合ASME Section VIII規范
• 焊工與焊接工藝符合ASME Section IX規范
• 在要求使用合金800, 600以及其他材料時采用高合金制造過程
• 加熱器、容器以及滑行裝置上配有重型鞍式支座以及吊耳
• 全面機械及電氣集成閥門、泵、鼓風機、儀表或者其他過程部件與儀器
• 列入UL® 508目錄的控制面板
• 多回路過程以及PLC控制器
• 全套I&M，附有部件手冊以及詳細的CAD圖紙。

瓦特隆過程系統團隊也明白工程延期會大大提高您的成本。只要可能，我們都推薦系統安裝在滑動底板上，相互連接，并在裝運前進行出廠檢驗，以實現快速的現場安裝和啟動。工廠工程師或者本地的現場代表可隨時提供現場技術檢查、培訓以及試運行服務。