德國IMS Messsysteme GmbH 測量系統

德國西馬克SMS-ELOTHERM GMBH感應淬火 激光技術

德國Guntermann & Drunck GmbH開關 模塊 控制器

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

KVM Extender

Description

The KVM Extenders from G&D extend computer signals. A KVM Extender consists of a computer module and a user module.

Basically KVM Extenders transmit:

• the video signal (single or multichannel),
• Keyboard/mouse (PS/2 & USB)
• USB 1.1, USB 2.0 (optional)
• Audio (optional)
• RS232 (optional)
• remote power switching sequences  (optional)

Distinguished video-wise, the following variants are available:

DVI Dual-Link

•  

   

• up to 400 metres over fibre

   

   

• resolution up to 2 x 2560 x 1600 @ 60Hz or 2 x 2048 x 2048 @ 60Hz

   

   

DVI-Single-Link

•  

   

• up to 140 metres over CAT-x cable or

   

   

• up to 400 metres over fibre

   

   

• resolution up to 4 x 1920 x 1200 @ 60Hz

   

   

DVI-Single-Link / VGA

•  

   

• up to 10.000 metres over fibre

   

   

• resolution up to 1920 x 1200 @ 60Hz

   

   

VGA

•  

   

• up to 300 metres over CAT-x cable

   

   

• resolution up to 4 x 1920 x 1440 @ 75Hz

   

   

Signal Extender

Single signal extender for transmitting

•  

   

• RS232

   

   

• USB 2.0 or

   

   

• audio

   

   

KVM Switches

The KVM switches are used to operate 2 - 256 computers via one or two concurrent workstations. The switches are always stand-alone devices. Only the ControlCenter 1 range offers an extra workstation module in addition to the changeover switch.

The KVM switches switch the following signals:

• digital video / analog video
• keyboard/mouse PS/2 and USB
• transparent USB 2.0
• and audio

Depending on the product and application, various signals are combined - from one switch exclusively for keyboard/mouse and audio through to a multi-channel video switch which switches 4 x digital/analog video, keyboard/mouse, USB 2.0 and audio per computer.

A further differentiating feature is the number of computers which can be connected. G&D provides products for 2, 4, 8 or 16 computers in this product group.
 

Digital video

DVIMUX4

• Signals: analog video, keyboard/mouse PS/2 and USB, USB 2.0 transparent, audio
• Computers: 4

DVIMUX8

• Signals: analog video, keyboard/mouse PS/2 and USB, USB 2.0 transparent, audio
• Computers: 8

Digitales multi-channel video

DVIMUX4-MC

•  

   

• as for DVIMUX4, but with up to 4 digital / analog video channels per computer

DVIMUX8-MC2

• as for DVIMUX8, but with up to 2 digital / analog video channels per computer

Analog Video

miniMUX2

•  

   

• Signals: analog video, keyboard/mouse, PS/2 and USB

   

   

• Computers: 2

miniMUX4

•  

   

• Signals: analog video, keyboard/mouse, PS/2 and USB

   

   

• Computers: 4

Analog multi-channel video

miniMUX2-MC

•  

   

• as for miniMUX2, but with up to 2 analog video channels per computer

miniMUX4-MC

•  

   

• as for miniMUX4, but with up to 4 analog video channels per computer

Analog multi-channel video + scenario switching

Triple MUX

• Signals: 3 x analog video per computer, keyboard/mouse, PS/2 and USB on the workstation side
• Computers: 4

QuadMUX

• as for TripleMUX, but with 4 analog video channels per computer

Keyboard/mouse + audio

TradeSwitch 2

• Signals: keyboard/mouse PS/2 and audio
• Computers: 2

TradeSwitch 4

• Signals: keyboard/mouse PS/2 and audio
• Computers: 4

KVM Matrixswitches compact

Description

With the compact KVM Matrixswitches you control computers over several different workplaces. The G&D products allow a flexible and decentral operation of large or distributed IT installations.

The access to the servers is carried out over up to 128 simultaneous workplaces, which are connected to the Matrixswitches locally or remote over CAT cables or over IP. The descriptions display the maximum expansion stage.

Three different systems are available.

CATCenter X and CATCenter NEO products can be combined. The CompactCenter works independent from the two other systems.

DVICenter DP32 system

Consists of:
User module, central modul, computer modul

Exteneral user modules:
DVI-CON, DVI-CPU

Supported signals:
DVI, keyboard/mouse, audio

The number of computer ports as well as the number of user ports can be assigned in any order within the total of 32 ports (DP32 = Dynamic Port Technology for 32 ports).

CATCenter NEO system

Consists of:
User module, central modul, computer modul

Exteneral user modules:
KVM-over-IP, KVM-over-CAT, KVM local

Supported signals:
VGA, keyboard/mouse, audio

4, 8 or 16 workplaces, expanded up to 128
32 or 64 computers, expanded up to 1024

CATCenter X system

Consists of:
User module, central modul, computer modul

Exteneral user modules:
KVM-over-IP, KVM-over-CAT, KVM local

Supported signals:
VGA, keyboard/mouse

2 workplaces
16 computers, expanded up to 1024

CompactCenter X2

Consists of:
central modul, computer modul

Integrated user modules:
KVM-over-IP, KVM local

Supported signals:
VGA, keyboard/mouse

2 workplaces, not expandable
16 computers, not expandable

KVM Matrixswitches modular

KVM Matrixswitches – modular

Modular KVM Matrixswitches are used to operate several computers over several different user consoles. Therefore these G&D products allow a flexible and decentral supervision of IT-Installations.

The computers can be accessed by up to 16 simultaneous user consoles, which can be linked to the system locally, remoy via CAT cable or over IP.  

Explanations always show the maximum expansion stage.

Three different systems are available:

ControlCenter4-n

•  

   

• 4 workplaces, expandable up to 8

   

   

• 12 computers, expandable up to 96

   

   

ControlCenter8-n

•  

   

• 8 workplaces, expandable up to 16

   

   

• 12 computers, expandable up to 96

   

   

ControlCenter-4n-MC

•  

   

• 4 workplaces with up to 4 monitors each

   

   

• 12 computers, expandable up to 96

   

   

Similarities

System components:

•  

   

• Matrixswitch

   

   

• user card

   

   

• computer card

   

   

• computer module

   

   

User cards

•  

   

• KVM-over-IP

   

   

• KVM-over-CAT

   

   

• KVM local

   

   

User modules

•  

   

• CATRem-(MC)

   

   

Supported signals

•  

   

• VGA

   

   

• Keyboard/mouse

&wrap= | &md5=a6e4cc21057fc38d809b9a8ad5a567ef','thePicture','width=800,height=402,status=0,menubar=0'); return false;" > ControlCenter 4/n Front view

&wrap= | &md5=9ef6fdb408e2f7057b70aba51af81671','thePicture','width=800,height=444,status=0,menubar=0'); return false;" > ControlCenter 4/n back view

&wrap= | &md5=ba1e45f73e9e96e95db10b97c8a98dd9','thePicture','width=800,height=500,status=0,menubar=0'); return false;" >

ControlCenter 4/n MC2 back view

KVM Remote Access

Fundamentals

With the Remote-Access products from G&D, you are able to operate your computer remoy

The keyboard, video, and mouse signals are digitally transmitted over the existing cable-infrastructure, without having a dedicated connection.

These systems are available:

• remote maintenance system over ethernet: Acxos
• IP-workstation modul for CATCenter-systems: UCON-IP-eco

IP-workstation modul for CATCenter-systems

UCON-IP-eco

transmittable signals: analog video (VGA), keyboard/mouse (PS/2) No. of workstations: 1x local, 1 x remote over IP switching local: AdonIS switching over IP: control board or AdonIS transmission medium: CAT cable with CATCenter systems connection to LAN over another CAT cable &wrap= | &md5=92c9af6ec77b369ce4b2c7acf2d5b2e1','thePicture','width=800,height=354,status=0,menubar=0'); return false;" > UCON-IP-eco rear view KVM Sharing UserCenter 2/4 Operate a common-use computer via the UserCenter from G&D. Up to 4 consoles can access the computers and alternay operate it. An inligent management system handles the access to it. The UserCenter is available for 2 or 4 consoles.   DualUserCenter 2/4 By means of the DualUserCenter you have the possibility of connecting up to 2 monitors per console. The DualUserCenter is available for 2 or 4 consoles. KVM Converters The KVM converters from G&D, with their versatile possibilities, ensure that you can consolidate signal conversion between heterogeneous computer systems and diverse peripheral devices by means of a G&D switching system.   The KVM signals can be converted accordingly on both the CPU side as well as on the console side.   CPU-side converter       Connection of a Sun server with 8-pin mini-DIN keyboard/mouse Integration of a serial device (VT100) into a KVM system   Console-side converter       Operation of x86 systems with a Sun keyboard Integration of a special keyboard - such as a REUTERS - into a KVM installation   Video converter       Consolidation of diverse video formats in one KVM system from G&D Compensation for delay differences of a VGA signal via CAT cable KVM Add-on Description The KVM Add-On group represents "value-added products", for all the other KVM product groups. The following KVM Add-On products are available   DevCon Center The DevCon-Center forms part of the group KVM ADD-On. It serves as central appliance for monitoring the status of networkable G&D devices of different product groups. I-Key The I-Keys are programmable input devices with 16 (I-Key16) or 20 (I-Key20) keys. HK-Controller The HK Controller makes possible the transfer of up to a maximum of 10 hot key sequences (for switching between computers, for instance) to any G&D device. RackConsole 17 The TFT-Key Drawer combines a high-quality display with a compact keyboard, including touchpad, in a compact chassis, which measures only one height module. Video In the area of video you can actively multiply (on up to 8 monitors) signals with G&D products or, for example, double and strengthen a signal for a beamer. This way distances of up to 110 metres can be bridged. DVISplitter2/4   max. resolution up to 1920 x 1200 @ 60Hz Transmission of digital video signals over distance. Distribution of digital video signals up to 4 displays. By cascading the DVISplitter, the number of connectable monitors can be increased.   Videoline4   max. resolution up to 1920 x 1440 @ 85Hz Video bandwidth up to 250 MHz Through cascading - connection of several displays possible Transmission of signals up to 20 Metres   VS2plus   Doubling of a VGA signal Up to 110 m transmission range Adjustable amplification HardBoot Description The HardBoot is a remote power switch. It makes it possible to switch on and off remoy separated target devices such as servers, routers and hubs.   The HardBoot master can switch the power supplies for up to 8 target devices. The number of switchable ports is increased to 40 through the cascading of the HardBoot master with up to 4 slaves.   With two independent, redundant power circuits, and the possibility of combining up to three powerports into a group and then switching these together, this system is ideal for "mission critical"? servers with redundantly configured power supplies.   Features   Individual control of up to 40 powerports via one IP Individual restarting of no longer accessible target devices Automatic restarting of the target devices after a preset time period Access via Ethernet with HB view toolware, or Serial access via HyperTerminal or OSD (in conjunction with a G&D KVM-Switch) Password protected access Standby LEDs 2 separay secured power circuits; galvanically separated Up to 120 A peak power per device is possible Up to 10 A steady-state load is possible HiAmp technology for problem-free switching on of target devices with high peak power Group functionality for optimum handling Free assignability of target device names High package density of just one 1 U   Deployment scenarios The HardBoot application can be flexibly used with or without the master device:       Deployment as a stand-alone The master is connected to the network by means of an IP address. Hence, the control is handled via Ethernet. In case of cascading, the slaves are connected as with a bus.     Installation The target devices are connected by a standard electrical power cable with the HardBoot. After a successful initial installation by means of a terminal program, the HardBoot master is then connected to the network via the link interface.   Using the toolware HardBoot view, you then have immediate access to all necessary settings and can already work with the system. When in operation with a KVM switch, you connect the first slave with the serial connection of the KVM switch.   Redundancy Every HardBoot works with two independent power circuits (phases) which are galvanically separated.   This is an important function for "mission critical" servers, as with this up to three power sources can be assigned cross-phase to a server. In case of failure of a power source, the supply of power to the target device remains assured through the redundancy.   Of course, the independent power circuits can be switched together, enabling a defined switching of the server. Up to 3 power sources can be combined in a group and switched together.   QUICKINFO Characteristics Electronic switch for AC voltage supply with remote access Configuration Compact system for up to 8 electrical consumers Stages of expansion Up to 40 consumers Switching current 2 x 10 A Special features Grouped switching possible, 3 independent power circuits, remote activation via TCP/IP     &wrap= | &md5=01726a69f483c91da493c261f9f810a7','thePicture','width=800,height=148,status=0,menubar=0'); return false;" > HardBoot front side &wrap= | &md5=cab8ed7ab824eed81fccc13cd28e6685','thePicture','width=800,height=183,status=0,menubar=0'); return false;" > HardBoot back side &wrap= | &md5=1772251e606d5e7c214576cdd9f9f3ad','thePicture','width=800,height=460,status=0,menubar=0'); return false;" > HardBoot master/slave

Connection technology

In the area of connection technology, there is nothing that doesn't work with G&D. We can produce computer cables for virtually every connection need, and also offer you our G&D standard cables for connecting your computers to our KVM switches.

We offer you the following benefits:

• Expert advice
• In-house configuring of cables
• Top-quality processing
• A vast product portfolio

True for all cables from G&D:

• Premium quality
• Individually manufactured to customers' specifications
• Easy installation
• High electrical and mechanical loading

We manufacture all computer cables (keyboard, video and mouse) according to the configuration plan and in the lengths that you require. Whether you need a special cable for Sun video, or wish to hook up a Sun monitor to a standard PC, or you want to remoy connect your console up to 10 m away via a single-cable extender - we can put together the right cable for your individual configuration.

You get G&D tested and recommended quality...

...and, along with it, security for your application!

&wrap= | &md5=d9995a187532ce7bb306523177db5a76','thePicture','width=400,height=291,status=0,menubar=0'); return false;" > 5 x BNC (RGBHV)

&wrap= | &md5=724bb8ccfc577c724c903e5cdb203bd0','thePicture','width=400,height=290,status=0,menubar=0'); return false;" > PS/2

&wrap= | &md5=8ff893f303bb2ed96931fb89e9d055f9','thePicture','width=400,height=284,status=0,menubar=0'); return false;" > Standard VGA

&wrap= | &md5=a6e29cabba0bf11602eb549efbdbae61','thePicture','width=400,height=289,status=0,menubar=0'); return false;" > SUN Video

KVM Practical examples

Find out more about applications with G&D products based on some selected actual examples.

From the simple connection of a server room to a workplace, on to a complex cascaded control of computers over great distances, we would like to demonstrate a little more closely the performance capabilities of our products.

Our entire sales force is available to answer any specific requests or questions that you might have.

Induction hardening 感應淬火                         Flexible hardening machine with automated retooling for various sizes of small and medium crankshafts           Tough outer shell, elastic core SMS Elotherm's highly sophisticated, versatile and practically- oriented application solutions are key to induction hardening and tempering technology. The inductive boundary-layer hardening and remelting techniques developed by SMS Elotherm have become essential ingredients ensuring the wear-resistance of crankshafts and camshafts in the production of both gasoline and diesel internal combustion engines. Depending on the exact requirements of our customers, we supply fully automated crankshaft hardening machines for in-line integration or complete, stand-alone hardening centers with their own recooling plants, testing equipment and additional peripherals. Our automated transfer hardening machines are particularly suited to processing components for the automotive industry such as axle journals, threeway supports and other jointed components. By using specially designed retooling kits, it ispossible to quickly change from one component family to another. Apart from the numerous common applications of induction heating there is also a range of less frequent fields of application. Our research & development and production team are pleased to take over the planning and realization of complete special-purpose machines. Thanks to the use of tried-and tested standard components combined with the experience and skills of our engineers, we can develop special-application machines that exhibit the same benefits as our standard machines.

Technologies   Induction hardening Surface hardening of crankshafts Remelt hardening of crankshafts Continuous quench and temper process Hardening of axle shafts Progressive hardening of recirculating ballscrews profiles and lathe beds                       Micrograph of a split-pin crankshaft

Induction hardening of crankshafts                                   ELOWIG remelting technology for camshafts                                       Up to 350 shafts per hour are treated on this hardening machine                                   Universal machine for economical and high-quality hardening of a wide range of components                                       Special-purpose machines for induction hardening of ring bearings used on shipboard cranes                                   Continuous-feed hardening of steel sections               Laser     Laser technologies  激光技術     Excimer laser for engine building The method: Treatment of cylinder bores in grey-cast cylinder crankcases using Excimer lasers Uncovering of the graphite flakes Creation of a non-metallic surface structure The benefits: Reduced oil consumption Longer service life due to reduced wear Less friction losses Good running-in properties Increased wear resistance       Technologies   Laser technology                       The Excimer laser in operation           The engineering for motor engines has today reached a very high level. The ratio between engine power and engine weight has been constantly improved and the attainable running distances have become ever longer. These improvements were achieved, for example, by increasing the component rigidity of the crankshaft, and by reducing friction wear to the camshaft, drag levers and tappets. For decades, the motor industry has produced cylinder blocks from casting materials specifically matched to the interactions between bore, piston ring and lubricant in order to achieve satisfactory running performance. The decisive factor for the running properties is the constitution of the surface of the cylinder bore.                     The Excimer laser for engine building           The multi-step honed surface of a modern grey-cast cylinder block displays a surface with honing striation running at a defined angle and with a number of openly visible graphite flakes, which are intended to maintain sufficient lubrication of the bore and piston ring. The honing striation permits the passage of lubricant in the direction of the combustion space, and the graphite flakes smeared over during the honing process reduce the retention of oil. This is where the Excimer laser is able to help. If the surface of a cylinder bore pretreated in a special honing process is subjected to the laser beams of the Excimer laser in an appropriate manner, this produces a surface structure in which the cavities of the graphite flakes are uncovered. Engine oil collects in these cavities. This produces microscopic pressure chambers which optimise the lubrication of the system “piston ring - cylinder”. A system suitable for industrial use has been developed within the framework of the BMB-sponsored project “Precision treatment of cylinder bores for internal combustion engines with UV photons” pursued jointly by the companies Audi AG, Ingolstadt, SMS Elotherm GmbH, Remscheid, and LAMDA PHYSIK, Göttingen, together with the institute ATZ EVUS in Vilseck. Ready for series implementation in the motor industry, the system can even be integrated into existing production lines. The Thixo process  觸變過程     Accurate to within one degree Thixotropic forming is a process related to die-casting that allows the continuous production of high-grade components from aluminum alloys. A crucial feature of this process is the thixotropic condition of the alloy. The alloy must reside in a closely defined range between the solid and liquid states. It is precisely for this purpose that we developed the ELOTHIX system, which is an automated line capable of cycle times of as little as 50 seconds using, for example, 5 Elothix units and the corresponding additional modules.     Technologies   THIXO process technology Helicoidal stirrers for Thixo aluminium alloys                           Bolt warming in horizontal position (any length / diameter ratio possible).                                   Soft as butter - but not fluid: thixotropic state of aluminium alloy                                         The ELOTHIX machines heat slugs in a horizontal position, which is particularly favorable for this technology                   Stirring     Induction stirring technology  感應攪拌技術     To define a single process with a high degree of accuracy it is essential to have the experience and capabilities to understand the complexity of the entire system. One particular example of this is SMS Elotherm's induction stirring of aluminum alloys and the subsequent thixotropic forming stage. Here, two technological applications that must be ideally matched to each other are merged. SMS Elotherm's electromagnetic stirrer - already a worldwide standard in the continuous casting of steel - has been redesigned with helicoidal stirrers for non-ferrous metals as a precondition for the innovative application of thixotropic forming technology. This system guarantees that the aluminum alloy has the ideal fine-grained structure for subsequent forming.     Technologies   Continuous casting of steel Continuous casting of non-ferrous metal and aluminium                           In continuous casting of steel, induction stirring is the state of the art. Modular components made by SMS Elotherm enable this process to be optimized.                                   Helicoidal stirrer for aluminium alloys                                                          unstirred                       stirred              Material: Aluminium with approx. 7% Silicon                   Welding     Tube welding                           Thickwalled HF welded percision tube           An all-around answer for tubes Versatile induction and conduction heating of tubes is key to increased productivity and quality assurance. HF straight seam welding for tubes and shaped sections, MF seam annealing, induction tube heating for a range of subsequent processes such as sizing, tube bending, tempering, coating etc. are key aspects of this technology. A decisive factor in the manufacture of tubes is the precise matching of all the machining processes to each other. This is where SMS Elotherm's experience and skill come in. Tube welding SMS Elotherm tube-welding systems are designed as economical modular units based on tran sistor technology ranging from 50-2000 kW. The ideal frequency selected from a range of 50-600 kHz guarantees optimal conditions for HF welding of steel, aluminum, brass or copper. The control, regulation and monitoring functions can either be implemented locally or linked to a downstream seam-annealing process..                   The welding process                     Annealing     Annealing technology  退火工藝     Seam-annealing Seam-annealing systems built by SMS Elotherm, for tube diameters from 3 to 24 inches, provide perfect seam annealing thanks to optimally controlled power distribution matched to the tube speed. Speeds adjusted to suit the welding process, optimal frequency selection, process data monitoring and management ensure a uniform, homogeneous seam with continuous precision. The ELOMAT frequency converters developed and manufactured by Elotherm guarantee high levels of reliability due to accurate adaptation to the requirements of each processing stage..                   Inductor system for seam annealing                 Technologies   Tube-welding Seam-annealing Black-annealing Bright-annealing Annealing and drying strip Tube-coating Heating strip ready for coating   Coating     Coating technology  涂層技術     For many modern work processes, such as calibration, tempering, coating, etc., exact determination of the process heat and precision warming are decisive factors for process reliability and for the quality of the final product. Continuous inductive warming for strip and pipe products is a focus of our technologies.

產品
X射線，同位素和光學測量系統
為鋼鐵和鋁金屬行業，
在線和非接觸式。

- X射線測量系統
·厚度和厚度剖面
·邊緣
·多通道測量系統
·涂布 - 金屬和有機
 
- 同位素測量系統
 ·燈管壁厚和偏心
- 光學測量系統
 ·寬，料位，
·作物的形式和裁切長度，
·燈管的直徑和長度，
·直線
·平坦度TopPlan
·涂布IMSpect
·板尺寸
·表面缺陷
·內部缺陷（超音）
- 激光測量系統
 ·距離
·調速和長度
- 溫度測量系統
 ·溫度
·溫度橫剖面 
  
測厚儀 
寬儀
涂層測量系統