壓力式噴霧造粒干燥機

 壓力式噴霧造粒干燥機

應用：

食品、醫藥、化工、染化、陶瓷、生化、農藥、塑料等適用具有相應流動性的液體。
It is suitable for liquid of foodstuff, pharmaceutical, chemical industry, dyestuff, ceramics, agrochemicals, plastic and so on.

 壓力式噴霧造粒干燥機概述：
  壓力式噴霧干燥造粒機是采用壓力式霧化器借助隔膜泵的壓力將溶液或漿狀的物料霧化成細微液滴，使表面積顯著增大，經與熱風進行充分熱交換得以快速干燥(十幾秒至幾十秒)，從而得到粉體或細小顆粒產品的設備。
The liquid or paste raw material is spraied into minuty liquid drop by pressed spraier draw assistance from pressure of diaphragm pump,
and quickly drying through short heat exchange.(10sec.) at last, the powder or small granule is obtained.

特點：

1、干燥速度快，特別適用于熱敏性物料:
2、所得產品為球狀顆粒，粒度均勻，流動性、溶解性好，產品純度高，質量好;
3、使用范圍廣，可進行熱風干燥、造粒、也可以進行冷卻造粒、噴霧結晶、噴霧反應等。
4、可配備細粉回送，再濕附聚系統，滿足用戶對物料粒徑的要求。
5、操作簡單穩定，控制方便，容易實現自動化作業，產品粒徑、松密度、水份在一定范圍內可以調節。
< The dry speed is fast and suitable for drying thermal sensitivity material particularly.
< The finished product is ball granule with uniform size. Its fluidity and solubility are good. The purity of product is high and its quaity is good.
< It applied scope is wide. According to the characteristics of raw material, it can use hot air to dry and can also use cool air to granulate. It has strong adaptability to raw materials.
< Its operation is simple and stable and its control is simple and convenient and is easy to realize automatic operation.
<> The product particle diameters, looseness and water contents can be adjusted through changing the operation condition within a certain range.