壓力計針型閥概述:
壓力計針型閥比其他類型的閥門能夠耐受更大的壓力,密封性能好,所以一般用于較小流量,較高壓力的氣體或者液體介質的密封.針型閥形與壓力表配合使用是zui合適的了.
壓力計針型閥主要零件材料:
零件名稱 | 閥桿 | 閥體 | 閥底座 | 填料 | 填料閥蓋 Packing | 手輪Handwheel |
J49H-320-DN3 | 碳鋼 | 鉻不銹鋼 | 聚四氟乙稀,柔性石墨 | 碳鋼Carbon steel | 優質碳鋼 | |
J49H-320P-DN6 | 鉻鎳不銹鋼 | 鉻不銹鋼 | 鉻鎳不銹鋼 | 不銹鋼Stainless steel |
型號 | 公稱壓力PN Mpa | 試驗壓力PS(Mpa)_Test pressure | 工作壓力(Mpa) Working pressure | 工作溫度(OC) Working temps. | 適用介質Applicable medium | ||
殼體 | 密封(液)Seal | 密封(氣)Seal | |||||
J49H-320 | 32.0 | 48.0 | 35.2 | 0.6 | 32.0 | P≤540OC | 液化石油氣水,酸,蒸汽,油品等 Petroleum gas Water,As,Steam,Oil,etc. |
J49H-320P | 32.0 | 48.0 | 35.2 | 0.6 | 32.0 | C≤425 OC |
型號 | 公稱直徑DN(mm) | 尺寸 Dimension | 重量(kg)Weight | |||||||||
L1 | D1 | D2 | L2 | H | H1 | h | H’ | M1 | L3 | |||
J49H-320 | 3 | 60 | 65 | 50 | 60 | 88 | 100 | 15 | φ70 | M20×1.5 | 16 | 1.3 |
J49H-320P | 6 | 60 | 65 | 50 | 60 | 88 | 100 | 15 | φ70 | M20×1.5 | 16 | 1.3 |