100S鹽氣溶膠自動過濾器測試儀
產品規格 ：100S鹽氣溶膠自動過濾器測試儀
| 尺寸 | |
| 大小 | 71厘米寬× 69厘米× 89 Ð的H（28“寬× 27的”D × 34“高） |
| 重量 | ?150bs（68公斤） |
| 氣霧劑： | |
| 大小和分布 | 0.075μm計數中徑，平均直徑0.26μm質量 |
| 重量標準偏差 | <1.7 |
| 濃度 Concentration | 每立方米35至45米（M引m毫克） |
| 測量/操作條件： | |
| 效率 | 高達99.9995％ |
| 壓力 | 0到200的水柱（0至7.88的WC英寸）精度± 2.5％滿量程毫米 |
| 流量 Flow Rate | 每分鐘10至120公升（或alpm接有） 精度±（0.4％讀數+ 0.2％滿量程） |
| 公用事業： | |
| 電動 l | 110VAC/60赫茲或220VAC/50Hz |
| 壓縮空氣 | 283 SLPM@5.6㎏（10 scfm的@ 80 PSIG中） |
英文詳細介紹
Description Meeting industry needs The 100S Salt Aerosol Automated Filter Tester was designed to meet the NIOSH 42 CFR Part 84 Respiratory Testing Standard with a heavy focus on the end-user. The 100S is the new industry standard in filter testing. A high level of performance coupled with low maintenance and service requirements make the 100S ideally suited to meet the rigorous quality control and validation requirements of both product development and production environments. The 100S is undeniably the most user friendly and cost effective salt aerosol filter testing solution available today. A customer friendly design Easy maintenance Routine maintenance and servicing is easily performed in the field with easily accessible components such as the aerosol generator and operational filters. A maintenance mode allows the end user to perform full system diagnostics and troubleshooting from the touch screen or by remote workstation via USB connection.
The 100S Salt Aerosol Automated Filter Tester was designed to meet the NIOSH 42 CFR Part 84 Respiratory Testing Standard with a heavy focus on the end-user. The 100S is the new industry standard in filter testing. A high level of performance coupled with low maintenance and service requirements make the 100S ideally suited to meet the rigorous quality control and validation requirements of both product development and production environments. The 100S is undeniably the most user friendly and cost effective salt aerosol filter testing solution available today.
The 100S incorporates many features and benefits useful to the end user including a contemporary and intuitive touch screen user interface. Load testing has never been easier, quicker, and more accurate. “Set & forget” load testing allows the user to leave the instrument unattended due to automated, real-time flow adjustment coupled with logic that stops a load test when required. The patented aerosol generation system affords significantly reduced load testing times compared to the current industry standard – saving half the time. An automatic aerosol solution refill system eliminates the need for mid-day solution replenishment.
Product specifications: 100S Salt Aerosol Automated Filter Tester
Dimensions:
Size 71cm W × 69cm D × 89cm H （28“ W × 27" D × 34" H） Weight ~ 150bs （68kg）
Aerosol:
Size & Distribution 0.075µm Count Median Diameter, 0.26µm Mass Mean Diameter Gravimetric Standard Deviation < 1.7 Concentration 35 to 45 milligrams per cubic meter （mg/m3）
Measurements/Operating Conditions:
Efficiency up to 99.9995% Pressure 0 to 200 millimeters of water column （0 to 7.88 inches of w.c.） accuracy ± 2.5% of full scale Flow Rate 10 to 120 liters per minute （slpm or alpm）
accuracy ± （0.4% of reading + 0.2% full scale）
Utilities:
Electrical 110VAC/60 Hz or 220VAC/50Hz Compressed Air 283 SLPM @ 5.6 kg/cm2 （10 SCFM @ 80 PSIG）
Contact ATI Sales for further information
采購中心
