機械攪拌配料罐
1、材料采用進口316L或304,內表面經拋光處理,內表面粗糙度Ra0.4μm,外表面粗糙度Ra0.8μm。
2、攪拌分頂部機械攪拌和底部磁力攪拌:形式有推進式、螺旋式、錨式等。
3、配置有:空氣呼吸器、溫度計、蒸汽滅菌口、衛生型入孔、液位計及液位自控系統、萬向旋轉清洗球或根據客戶要求進行配置。
4、夾套可根據客戶要求,分盤管和全夾套。
5、保溫可根據客戶要求,采用巖棉:聚氨酯發泡:珍珠棉填充,外殼亦可根據客戶要求進行拋光或拉絲和亞光處理。
6、規格:50L-300000L
Usage:
It?applied?to?infusion,?injection,?oral?liquid,?blood?preparation,?biology,?fine?chemical?and?fermentation?industries.
Technical?parameters:
Material?adopts?316L?or?304,?inside?surface?roughness?is?Ra0.4μm,?outside?surface?roughness?is?Ra0.8μm.
Agitation?mode:?top?mechanical?agitator.
Impeller?type:?Propeller?type,?Spiral?type,?anchor?type?or?according?to?client’s?specific?requirement.
Jacket?form:?dimple?jacket,?full?jacket?or?coil?jacket.
Insulation?material?adopts?rock?wool,?polyurethane?or?pearl?cotton.
Components:?vent?filter,?sight?glass,?pressure?gauge,?manhole,?cleaning?ball,?wheel,?thermometer,?liquid?level?gauge,?and?control?system?or?according?to?clients’?specific?requirement.
Specification:?50L-300000L