進口潛水深井泵美國潛水深井泵

     進口潛水深井泵美國潛水深井泵

進口潛水深井泵技術參數：

尺寸：6英寸—12英寸 流量：5—600立方/小時

揚程：6—600米 功率：3—250千瓦

電源：電壓380V+5%，頻率50Hz+1%赫茲，三相交流電。

生產標準：NEMA標準。

進口潛水深井泵概述：

潛水深井泵的電機為密閉充水濕式結構。電機定子繞組采用耐水的聚乙烯絕緣，尼龍護套多層結構的電磁線。導軸承及推力軸承均采用水潤滑材質。電機內部充滿清水，用以冷卻電機和潤滑軸承。電機底部裝有調壓膜，用以調整由電機溫升引起的機體內清水的脹縮壓差。電機的上端軸上裝有防砂機構，用來阻止水中泥砂進入機體內部。

進口潛水深井泵工作原理：

是從井中提水的葉片泵，長軸深井泵是深井泵中應用較為廣泛的一種泵，一般多用于機井。深井泵主要由三部分組成：zui上面的是電動機，裝在井口地面上中間的是輸水管和傳動軸下端為深井泵的工作部分，淹沒在井水面以下。由于井深，要求揚程較大，長軸深井泵的揚程范圍一般為15～17 m。深井泵可分為分段式多級立式離心泵。根據深井泵的結構特點，進行正確的使用和及時排除故障現象，對保證深井泵的安全運行，延長其使用壽命都是至關重要的。

進口潛水深井泵美國泰樂TYLER售后服務：

*的服務鑄就*的企業讓客戶無后顧之憂。
1、按合同要求提供產品的合格證、銘牌、檢驗報告、產地證名、安裝說明書等。
2、顧客在驗收產品過程中，如出現與合同要求不符時，我司接到顧客通知后兩小時內給予處理。
3、我司提供十二個月以上產品質保期，時間從驗收合格之日起計算。
4、在正確安裝和使用下，出現產品質量問題，本公司將負責到底。

Submersible deep well pump

Technical parameters of imported submersible deep well pump:

Size: 6 inches - 12 inches flow: 5 - 600 cubic meters / hour

Head: 6 - 600 m power: 3 - 250 kw

Power supply: voltage 380V+5%, frequency 50Hz+1% Hz, three-phase alternating current.

Production standard: NEMA standard.

Introduction of imported submersible deep well pump:

The motor of the submersible deep well pump is closed and filled with wet structure. The stator winding of the motor is made of water resistant polyethylene insulation, and the electromagnetic wire of nylon sheath multilayer structure. Guide bearings and thrust bearings are lubricated with water. The motor is filled with water to cool the motor and the bearing. The motor is arranged at the bottom of the pressure adjusting membrane, to adjust the motor temperature rise caused by the expansion and contraction of the water pressure difference. The upper shaft of the motor is provided with a sand prevention mechanism for preventing the mud and sand from entering into the inner part of the machine body.

Working principle of imported submersible deep well pump:

Is the vane pump water from wells, long axis deep well pump is a pump is widely used in deep well pump, generally used for wells. Deep well pump is mainly composed of three parts: the top of the motor is installed on the wellhead in the middle of the water pipe and the lower end of the drive shaft is part of the deep well pump, submerged in the water below the well. Because of the deep well, the required lift is larger, the long axis deep well pump lift range is generally 15 ~ 17 M. Deep well pump can be divided into multistage vertical centrifugal pump. According to the structural characteristics of the deep well pump, it is very important to ensure the safe operation of the deep well pump and prolong its service life.

The United States imported submersible deep well pump TYLER Taylor customer service service:

The first-class service created a first-class enterprise so that customers no worries.

1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..

2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.

3, our company provides more than twelve months warranty period, the time from the date of acceptance.

4, in the correct installation and use, product quality problems, the company will be responsible in the end.

進口潛水深井泵guan網：http://www.twvalve。。ｎｅｔ/html/2340.html