進口潛水深井泵

進口潛水深井泵 進口潛水深井泵廠家 價格

Diving deep well pump

德國KAYSEN凱森進口潛水深井泵概述：
1、潛水深井泵為離心式或混流式；采用水潤滑軸承；與電機的聯接采用聯軸器剛性聯接。深井泵葉輪在電機帶動下旋轉產生離心力，使液體能量增加經泵殼的導流作用進行提水。在水泵上端設有逆止閥體，防止電泵停機時，因揚水管中倒流的水損壞工作部件。閥上有泄水孔，可將管路中的水緩緩放掉，防止冬天凍裂管路。 (注：低揚程潛水泵不設逆止閥體)
2、潛水深井泵的電機為密閉充水濕式結構。電機定子繞組采用耐水的聚乙烯絕緣，尼龍護套多層結構的電磁線。導軸承及推力軸承均采用水潤滑材質。電機內部充滿清水，用以冷卻電機和潤滑軸承。電機底部裝有調壓膜，用以調整由電機溫升引起的機體內清水的脹縮壓差。電機的上端軸上裝有防砂機構，用來阻止水中泥砂進入機體內部。
3、潛水深井泵的管路部分：用以聯接電泵使其吊裝在機井中，將水輸送到地面上去。主要由短輸水管、輸水管、彎管、夾板等部件組成。短輸出管是輸水管路與電泵的連接過渡部件。彎管安裝在井口處，以改變水流的傳送方向。夾板是在深井泵的安裝過程中吊裝和固定輸出管路。

主要優點：

●具有結構簡單

●機組效率高

●噪音小

●運行安全可靠

●安裝維修方便的優點

主要應用：

具有結構簡單，機組效率高，噪音小，運行安全可靠，安裝維修方便的優點。它適用于從深水井，熱水井及海洋提取，也可用于河流、水庫、水渠等提??；

主要用于農田灌溉及高原山區的人畜用水，亦可供城市、工廠、鐵路、礦山、工地供排水使用。

主要特點：

●結構簡單，節省原材料。

●電機、水泵—體，潛入水中運行，安全可靠。

●對井管無特殊要求，對輸水管只要能承受相應壓力即可。

●安裝使用維護方便簡單，占地面積小，不需建造泵房。

技術參數：

●尺寸：6英寸—12英寸

●流量：5—600立方/小時

●揚程：6—600米

●功率：3—250千瓦

●電源：電壓380V+5%，頻率50Hz+1%赫茲，三相交流電。

●生產標準：NEMA標準。

Germany KAYSEN imported diving deep well pump Overview:
1, diving deep well pump for centrifugal or mixed flow; use of water lubricated bearings; coupling with the motor using a rigid coupling coupling. Deep well pump impeller driven by the rotation under the centrifugal force, so that the liquid energy increased by the pump casing diversion effect of water. In the upper part of the pump with a check valve body to prevent the pump down, because the water pipe in the back of the water damage to the working parts. The valve has a drain hole, the water in the pipeline can be slowly released to prevent the winter freezing pipe. (Note: low-lift submersible pump does not set the valve body)
2, submersible deep well pump motor for the closed water filling wet structure. Motor stator windings are made of water resistant polyethylene insulated, nylon sheaths with multi-layer structure of the magnet wire. Guide bearings and thrust bearings are made of water lubrication material. The motor is filled with water to cool the motor and lubricate the bearings. The bottom of the motor is equipped with a pressure regulating film to adjust the expansion and contraction pressure of the water in the body caused by the temperature rise of the motor. The upper shaft of the motor is equipped with a sand control mechanism to prevent the mud from entering the body.
3, diving deep well pump part of the pipeline: to connect the pump to lift it in the machine, the water transported to the ground. Mainly by the short water pipes, water pipes, elbow, plywood and other components. The short outlet tube is the connection between the water supply line and the pump. The elbow is installed at the wellhead to change the direction of water flow. The splint is the lifting and fixing of the output pipe during the installation of the deep well pump.

Key Benefits:

● has a simple structure

● High efficiency of the unit

● low noise

● safe and reliable operation

● easy installation and maintenance advantages

main application:

With a simple structure, high efficiency unit, low noise, safe and reliable operation, easy installation and maintenance advantages. It is suitable for extraction from deep wells, hot water wells and oceans, and can also be used for extraction of rivers, reservoirs and drains;

Mainly used for farmland irrigation and mountainous areas of human and animal water, but also for cities, factories, railways, mines, site for water use.

main feature:

● Simple structure, saving raw materials.

● motor, pump - body, submerged into the water to run, safe and reliable.

● There is no special requirement for the well pipe, as long as the water pipe can withstand the corresponding pressure can be.

● easy installation and maintenance easy to use, small footprint, no need to build pump room.

Technical Parameters:

● Size: 6 inches to 12 inches

● Flow: 5-600 cubic meters per hour

● Head: 6-600 meters

● Power: 3-250 kW

● Power: voltage 380V + 5%, frequency 50Hz + 1% Hz, three-phase AC.

● Production standards: NEMA standards.

廠家 價格

德國KAYSEN凱森對您的承諾：

●放心的質量：從鑄件到產品，實行全過程質量監控，*檢測，責任到人！

●貼心的價格：高效成本控制，自產自銷，減少中間環節，讓利于客戶！

●快速的貨期：充足的庫存，上海便捷物流，縮短交貨期，嚴格按照合同期交貨！

Germany Kaysen commitment to you:

● Reliable quality: from casting to the product, the implementation of the whole process of quality control, all-round detection, responsibility to the people!

● intimate price: efficient cost control, production for sale, to reduce the intermediate links, to help customers!

● fast delivery: adequate inventory, Shanghai convenient logistics, shorten the delivery time, in strict accordance with the contract delivery!

廠家 價格